Need help (from russia) - swap 351w from 94 econoline
#1
Need help (from russia) - swap 351w from 94 econoline
Hello, I have stock 1995 Mustang GT (302), manual transm.
I want make something like 1995 cobra R, becouse stock 215 bhp - very low for my car.
I can find cheap used 351w block from 94 Bronco or Econoline van.
My quastion - can I use this engine block. (because, here, my friends ask me that this block and blocks that use in cobra R is much different, and if I install it in my car, car will have very high and slow torque for pulling but not for speed.
Can I make something with econoline block or critically important I need find (order from US) 351w cobra R block ?
Is 351w from `95 cobra R and 351w from 94` econoline is equal ?
And, if its ok, and I can use econoline block, If I buy this used engine, what other parts I will need to order, to make ~300-350 bhp engine on carburator.
Thanks for your answer, and sorry for my english.
I want make something like 1995 cobra R, becouse stock 215 bhp - very low for my car.
I can find cheap used 351w block from 94 Bronco or Econoline van.
My quastion - can I use this engine block. (because, here, my friends ask me that this block and blocks that use in cobra R is much different, and if I install it in my car, car will have very high and slow torque for pulling but not for speed.
Can I make something with econoline block or critically important I need find (order from US) 351w cobra R block ?
Is 351w from `95 cobra R and 351w from 94` econoline is equal ?
And, if its ok, and I can use econoline block, If I buy this used engine, what other parts I will need to order, to make ~300-350 bhp engine on carburator.
Thanks for your answer, and sorry for my english.
#2
And I heard what from 94 econoline 351w have roller camshaft.
Whats better for easyest and cheapest building engine (about 350 hp) - 351w with lifters of with roller cam ?
Thanks.
P.S. I already put im my stang:
1) Wilwoods 6 pistons front brakes
2) Maximum Motorsports - suspension + panhard bar + subframe connectors
3) Flowmaster exhaust
4) Saleen S351 bodykit, hood, R18 rims and decals. Screaming Yellow repainting.
http://s3.images.drive2.ru/car.journ...42840-main.jpg
http://s3.images.drive2.ru/car.journ...9c031-main.jpg
Whats better for easyest and cheapest building engine (about 350 hp) - 351w with lifters of with roller cam ?
Thanks.
P.S. I already put im my stang:
1) Wilwoods 6 pistons front brakes
2) Maximum Motorsports - suspension + panhard bar + subframe connectors
3) Flowmaster exhaust
4) Saleen S351 bodykit, hood, R18 rims and decals. Screaming Yellow repainting.
http://s3.images.drive2.ru/car.journ...42840-main.jpg
http://s3.images.drive2.ru/car.journ...9c031-main.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM