General Tech Ask model specific questions in the appropriate category below. All other general questions within.

window failure

Thread Tools
 
Search this Thread
 
Old Jul 2, 2015 | 03:25 AM
  #1  
tomm51's Avatar
tomm51
Thread Starter
 
Joined: Jun 2015
Posts: 5
From: Indiana
Question window failure

2006 V6 auto...My driver side window will not roll up or down automatically or go to the re-seal up position when the door is closed. 14k miles and never been on a wet road.
Old Jul 2, 2015 | 07:34 AM
  #2  
JimC's Avatar
JimC
Super Moderator
 
Joined: May 2006
Posts: 8,884
From: Michigan again!
Default

Try doing the reset procedure. You roll it down and hold the button for 5 seconds then roll it up and hold the button for 5 seconds (as I recall, it should be in your owners manual).
Old Jul 2, 2015 | 12:01 PM
  #3  
ucinn's Avatar
ucinn
3rd Gear Member
 
Joined: May 2015
Posts: 578
From: Ohio
Default

I don't think he can do that since he said the window will not go up or down... if it's just the driver's side, it'll be the motor or switch, get to the switch and use a meter to see if there is juice there and if it passes through.
Old Jul 2, 2015 | 02:30 PM
  #4  
JimC's Avatar
JimC
Super Moderator
 
Joined: May 2006
Posts: 8,884
From: Michigan again!
Default

I read his post to say it doesn't do the auto up or auto down, and the drop when the door is open. I don't think tomm51 is saying the windows don't work at all - but can you verify for us tomm51 just what the problem is?
Old Jul 2, 2015 | 05:55 PM
  #5  
tomm51's Avatar
tomm51
Thread Starter
 
Joined: Jun 2015
Posts: 5
From: Indiana
Default

Thanks for your replies and attention. I did the reset procedure and it worked perfectly! After I posted the problem, I checked again and it would roll down in automatic but not up, and it would not go up in auto to re-seal. This probably malfunctioned because my battery went stone dead on me while sitting in the garage waiting for us to come home from vacation...another problem I'm trouble shooting for a remedy... I didn't think to check the owners manual because whenever I have a problem with any of my three Ford's, 06 Mustang, 10 Escape, 98 Ranger, fellow owners such as yourselves always come through in these forums. Jim C and ucinn are my latest heroes. Thanks again...Tomm.
Old Jul 2, 2015 | 06:19 PM
  #6  
JimC's Avatar
JimC
Super Moderator
 
Joined: May 2006
Posts: 8,884
From: Michigan again!
Default

Originally Posted by tomm51
Thanks for your replies and attention. I did the reset procedure and it worked perfectly! After I posted the problem, I checked again and it would roll down in automatic but not up, and it would not go up in auto to re-seal. This probably malfunctioned because my battery went stone dead on me while sitting in the garage waiting for us to come home from vacation...another problem I'm trouble shooting for a remedy... I didn't think to check the owners manual because whenever I have a problem with any of my three Ford's, 06 Mustang, 10 Escape, 98 Ranger, fellow owners such as yourselves always come through in these forums. Jim C and ucinn are my latest heroes. Thanks again...Tomm.
Glad to hear you got it fixed with the help from our collective wisdom!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr620
V6 (1994-2004) Mustangs
2
Oct 3, 2022 10:18 PM
lincolnshibuya
V6 (1994-2004) Mustangs
4
Jul 5, 2020 03:05 AM
1TUFF302
5.0L (1979-1995) Mustang
11
Nov 5, 2015 04:02 PM
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
Sep 26, 2015 02:11 PM
mungodrums
5.0L GT S550 Tech
1
Sep 22, 2015 08:36 PM




All times are GMT -5. The time now is 11:31 AM.