96 GT Power Distribution Box
Thread Starter
Joined: Dec 2018
Posts: 1
From: TX
96 GT Power Distribution Box
96 GT won't crank. Battery good, igintion relay good, starter is new.
I tested the voltage at the foglight relay and horn rely. Both give 12+ volts. However, ignition relay gives only about 6 volts. Also, i cannot hear the relay click when the key is turned.
Can you tell me if 12V is required at this relay? Could it be a bad distribution box or wire for the relay?
I tested the voltage at the foglight relay and horn rely. Both give 12+ volts. However, ignition relay gives only about 6 volts. Also, i cannot hear the relay click when the key is turned.
Can you tell me if 12V is required at this relay? Could it be a bad distribution box or wire for the relay?
Thread
Thread Starter
Forum
Replies
Last Post
sarahsmustang
V6 (1994-2004) Mustangs
7
Sep 6, 2004 08:06 PM