Those anybody know, or is anybody out there using a B303 cam with factory springs. I ordeered a set of springs from summit, but if i can use the stock springs that came on the GT 40p heads I got I will return the springs i bought. 110.00 to much for a set of springs.

So anybody with spring experience, hit me back.

 

I don't reccomend using stock springs with any type of aftermarket cam. Stock springs are barley able to control a stock cam. You could go into valvle float if you use the stockers with the E cam

 

you think 110 bones it too much for springs?

oh make sure you have matching locators,and retainers.

 

Do what I just suggested to another stanger....use the crane kit. Look at the thread "E303 with stock heads" in general tech!!!!! Perfect match for the B & E cams.