Mach 1 Section This section is for discussions relating to the reincarnation of the Mach 1 trimline.

Mach Vs 350z

Thread Tools
 
Search this Thread
 
Old Mar 19, 2008 | 12:36 PM
  #11  
USMCrebel's Avatar
USMCrebel
Mach I Section Moderator
 
Joined: Mar 2007
Posts: 7,140
From: round abouts these parts
Default RE: Mach Vs 350z

huh, i could've swore the new ones were 333hp[>:]
Old Mar 19, 2008 | 12:47 PM
  #12  
jmac72187's Avatar
jmac72187
corner carver
 
Joined: Oct 2006
Posts: 4,371
From: New England
Default RE: Mach Vs 350z

ORIGINAL: USMCrebel

huh, i could've swore the new ones were 333hp[>:]
My friend is looking to buy one so I knew they were 306. They are a mid to high 13 second car at best. They will beat a 2v but lose to a 4v.
Old Mar 19, 2008 | 12:49 PM
  #13  
B.O.B MACH 1's Avatar
B.O.B MACH 1
1st Gear Member
 
Joined: Nov 2007
Posts: 110
From:
Default RE: Mach Vs 350z

i Heard Zs lose alot of power through there drive trains and not to much make it to the wheels, and that is why they are not that fast. idk if that is true though for the 07+
Old Mar 19, 2008 | 02:26 PM
  #14  
jmac72187's Avatar
jmac72187
corner carver
 
Joined: Oct 2006
Posts: 4,371
From: New England
Default RE: Mach Vs 350z

ORIGINAL: B.O.B MACH 1

i Heard Zs lose alot of power through there drive trains and not to much make it to the wheels, and that is why they are not that fast. idk if that is true though for the 07+
That could be it. I know the RX-8's lose 45+ rwhp through their drivetrain.
Old Mar 19, 2008 | 03:11 PM
  #15  
USMCrebel's Avatar
USMCrebel
Mach I Section Moderator
 
Joined: Mar 2007
Posts: 7,140
From: round abouts these parts
Default RE: Mach Vs 350z

45rwhp[sm=insomnia.gif][sm=jawdrop.gif] there's a chick here that has one, i wonder how it would do against me.
Old Mar 19, 2008 | 03:20 PM
  #16  
jmac72187's Avatar
jmac72187
corner carver
 
Joined: Oct 2006
Posts: 4,371
From: New England
Default RE: Mach Vs 350z

ORIGINAL: USMCrebel

45rwhp[sm=insomnia.gif][sm=jawdrop.gif] there's a chick here that has one, i wonder how it would do against me.
If you are talking about he RX-8's, the best people get out of them stock in the 1/4 are 14.4's. That isn't common either. My friend ran his and he was only running mid 15's. They are not fast at all. They are meant for auto x.
Old Mar 19, 2008 | 03:25 PM
  #17  
Trmachuno's Avatar
Trmachuno
5th Gear Member
 
Joined: Jul 2007
Posts: 2,365
From:
Default RE: Mach Vs 350z

ORIGINAL: jmac72187

ORIGINAL: USMCrebel

45rwhp[sm=insomnia.gif][sm=jawdrop.gif] there's a chick here that has one, i wonder how it would do against me.
If you are talking about he RX-8's, the best people get out of them stock in the 1/4 are 14.4's. That isn't common either. My friend ran his and he was only running mid 15's. They are not fast at all. They are meant for auto x.
+1, RX8's are no big deal. Andyou should be able to take any stock 350Z ina mach 1 unless you fail at driving. Stockmach 1 vsnew 350Z w/acouple ofbolt-ons=drivers race. Older 350Z's you'll haveno problem with unless they're f/i or full bolt-ons.
Old Mar 19, 2008 | 03:38 PM
  #18  
Machmax777's Avatar
Machmax777
1st Gear Member
 
Joined: Aug 2007
Posts: 134
From:
Default RE: Mach Vs 350z

yea i raced a older one about a year ago when all i had was the cai. went from like a 30-40 mph roll and he jumped me BAAAAD cause no one honked and i didnt even know if we were gonna race, but i was pulling really hard on him when he quit. id say he hada good 1-11/2 car jump and when he quit we were pretty muchdeadeven
Old Mar 19, 2008 | 07:09 PM
  #19  
Stone629's Avatar
Stone629
6th Gear Member
 
Joined: Feb 2007
Posts: 11,302
From: North Carolina
Default RE: Mach Vs 350z

I raced an 04 6spd 350z right before Christmas. I pulled on him bad, like 100yds by the time we went from a stop to 100mph. The older ones struggle to get a low 14. The new ones are fast, just a few tenths behind a Mach. In fact, if you're not on your Ps and Qs, a new 350z stands a good chance of staying right beside you in a Mach or nosing ahead on top end.

Rebel, don't even waste your time on that RX-8 unless you're just curious. I love those cars styling, handling, and especially the interior, but after test driving one, I knew I would regret buying it. It did absolutely nothing until I hit 4500rpm, and then it just gave the slightest lurch when it finally hit its powerband. Excellent handling and the smoothest shifter I've felt in awhile, but still wayy to slow. I think a torque monster would be more of a match for one on an 1/8th mile track.
Old Mar 19, 2008 | 07:59 PM
  #20  
rygi23's Avatar
rygi23
4th Gear Member
 
Joined: Dec 2007
Posts: 1,503
From: Maryland
Default RE: Mach Vs 350z

Imports absolutely suck anyhow.
Hey, what do y'all think about this for a license plate. MD has 7 characters.

"MPRTSUK"




All times are GMT -5. The time now is 05:29 AM.