change in plans
#1
Mach I Section Moderator
Thread Starter
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
change in plans
well boys and girls,
there has been a change in plans with my mach. It will no longer be going to the strip to race. I can't keep replaceing trannsmissions $$$$ is gonna run low. so now i will be starting another project called "Iron Man" that i will keep updated here. the basic run down of the project is stock iron everything (302)....what it will go in i dont know yet.
i will be having a photoshoot tomorrow of my car.
there has been a change in plans with my mach. It will no longer be going to the strip to race. I can't keep replaceing trannsmissions $$$$ is gonna run low. so now i will be starting another project called "Iron Man" that i will keep updated here. the basic run down of the project is stock iron everything (302)....what it will go in i dont know yet.
i will be having a photoshoot tomorrow of my car.
#4
RE: change in plans
good deal, i thought Iron block,heads were a downfall as opposed to aluminum? I know a couple things about pushrods( my v6 was one) easiest engines to work on i was planning on doing a Head/ cam swap just bought the mach instead glad i did
good luck got pics of the fox?
#5
Mach I Section Moderator
Thread Starter
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
RE: change in plans
nah, i havent pick one out yet....here what the build looks like (this will take years)
302 .010 over (got it)
b303 cam
gt40 heads w/ a home port
i beam rods
light weight pistons
42# injectors
cobra intake
70mm TB
twin or single turbo (john deere for single, or 2 turbo coupe turbo's)
home made intercooler
built c4 transmission
8.8 from a 94-95 gt with 3.90's/ 4.10's
running 8-10psi boost
looking for about 500rwtq 500hp
302 .010 over (got it)
b303 cam
gt40 heads w/ a home port
i beam rods
light weight pistons
42# injectors
cobra intake
70mm TB
twin or single turbo (john deere for single, or 2 turbo coupe turbo's)
home made intercooler
built c4 transmission
8.8 from a 94-95 gt with 3.90's/ 4.10's
running 8-10psi boost
looking for about 500rwtq 500hp
#7
Mach I Section Moderator
Thread Starter
Join Date: Mar 2007
Location: round abouts these parts
Posts: 7,140
RE: change in plans
ORIGINAL: SteelStang05
Looks like a nice project! . You strip out the carsomeI can see that thing going 9's on Slicks [8D]. No stall convertor on the list?
Looks like a nice project! . You strip out the carsomeI can see that thing going 9's on Slicks [8D]. No stall convertor on the list?
#8
RE: change in plans
ORIGINAL: USMCrebel
yeah, i'ev got one on the big list, but that would take 20mins to type.
ORIGINAL: SteelStang05
Looks like a nice project! . You strip out the carsomeI can see that thing going 9's on Slicks [8D]. No stall convertor on the list?
Looks like a nice project! . You strip out the carsomeI can see that thing going 9's on Slicks [8D]. No stall convertor on the list?
#10
RE: change in plans
ORIGINAL: USMCrebel
there has been a change in plans with my mach. It will no longer be going to the strip to race. I can't keep replaceing trannsmissions $$$$ is gonna run low...
there has been a change in plans with my mach. It will no longer be going to the strip to race. I can't keep replaceing trannsmissions $$$$ is gonna run low...
I feel for ya, man! [&:]