my suspension
#2
RE: my suspension
there are lots of places to get parts for the MII, like mustangs unlimited, and there used to be one specific to MII's, I just can't recall off the top of my head. Google is your friend. As for replacing all of the front end stuff, I found everything at Auto Zone when I went through my front end. If I remember right, there was not one part that I couldn't get. Some of it had to be ordered in, but it didn't really cost me all that much, and I replaced EVERYTHING.
[align=left] [/align]
[align=left] [/align]
#3
RE: my suspension
sorry it took me so long to respond, been soo busy. lol
i still need the parts. every sigal bushing is shot. and the back end sags, i either need new leef springs or get the current ones re sprung
i still need the parts. every sigal bushing is shot. and the back end sags, i either need new leef springs or get the current ones re sprung
#5
RE: my suspension
thankfully when i was the mod around these parts i compiled a list of places to get parts for our cars - its up top in the FAQ section.
P-S-T.com carries complete polygraphite front end rebuild kits. new ball joints, tie rod ends, bushings, everything. i dont see it on their website for some reason but its where i got all my stuff. i also used their "heavy duty / big block" springs in the front, and i have a spring shop cut me pieces of springs to add an extra leaf in the back on each side
P-S-T.com carries complete polygraphite front end rebuild kits. new ball joints, tie rod ends, bushings, everything. i dont see it on their website for some reason but its where i got all my stuff. i also used their "heavy duty / big block" springs in the front, and i have a spring shop cut me pieces of springs to add an extra leaf in the back on each side
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
2.3L Eco-Boost Tech
2
11-24-2015 06:11 AM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM