new member
#1
new member
hey everyone, im a new member and ive got a project mustang that ive been working on for a lil over a year now and its been rough but almost done. i started out with a complete 91 mustang gt parts car, stripped it down to nothing even the wiring harness, then bought a 86 lx couple for a $100. its been stripped and partially painted, engine and tranny gone through, and put back in, but still not wired up to start.
here are some of the things that are on it, but the list would be too long to list everything.
91 5.0 converted back to carb.
holley 600 double pumper
bbk shorty headers
125 shot of nitrous
e303 cam with 1.7 roller rockers
hardend pushrods and stiffer springs
underdrive pulleys
transgo shift kit
2800 stall converter with ballooning plate for nitrous
holley blue fuel pump
mallory unilite distributor
mallory ignition box and coil
poly motor mounts
upr cromemolly rear controll arms
5 lug conversion
aluminum door pannels
88 grey interior
4 inch cowl hood for clearance
the list goes on but i am looking foreword to talking and learning alot
here are some of the things that are on it, but the list would be too long to list everything.
91 5.0 converted back to carb.
holley 600 double pumper
bbk shorty headers
125 shot of nitrous
e303 cam with 1.7 roller rockers
hardend pushrods and stiffer springs
underdrive pulleys
transgo shift kit
2800 stall converter with ballooning plate for nitrous
holley blue fuel pump
mallory unilite distributor
mallory ignition box and coil
poly motor mounts
upr cromemolly rear controll arms
5 lug conversion
aluminum door pannels
88 grey interior
4 inch cowl hood for clearance
the list goes on but i am looking foreword to talking and learning alot
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM