Frank_Bullitt

Welcome Ryan, I just got done with doing my front floor pans on my 67. I would go to Mustangunlimited.com for the pans, they use 18ga steel if I remember right so it should be alot thicker and strong then your old pans. Also cutting them out you got to be very carful, take alot of time planing and make sure you go slow and get it cut right the first time. The pan will be some fiting and cutting themselfs if you don't match perfect which I didn't do so it took a little work. I have a older picture of my pans in that I'll try and post up for you here.
Not sure what kind of welder you might have or if you have the right place and tools for it, this is something you might just want to have someone else do for you, cuz they might do a faster better job. All depends on what kind of place you got set up for it. Also a car lift is something that makes the job 10X easier. (another thing to think over) The pans cost about 25 bucks each and I am not sure how much it would cost for someone to do it for you. Might end up being cheeper then you having to do it.

Well best of luck and I'll try and get those pictures up.