Caster/Camber Plates
#1
Caster/Camber Plates
Hey guys (I posted this in handling but it only has like 3 hits now and 2 of them are mine lol).
Last month I dropped my car with Sportlines and I decided I need caster/camber plates..
Do you guys have any suggestions (links) for the products?
Also I am looking for a decent set of shocks to replace my stockers (its a harsh *** ride now..lol)
I WANT d-specs, but I'm about $450 short of them..lol..
Any cheaper but still quality shocks?
Thanks.
FM
Last month I dropped my car with Sportlines and I decided I need caster/camber plates..
Do you guys have any suggestions (links) for the products?
Also I am looking for a decent set of shocks to replace my stockers (its a harsh *** ride now..lol)
I WANT d-specs, but I'm about $450 short of them..lol..
Any cheaper but still quality shocks?
Thanks.
FM
#4
RE: Caster/Camber Plates
just get the camber bolts? your tires are wearing on the inside right? mine did when i got my sportlines on them. all it takes to fix them is a camber bolt kit and a re-alignment. no need for a 250 dollar camber kit. the bolts will fix you right up.
#5
RE: Caster/Camber Plates
Well thats comforting
so you got a link to these camber bolts?
My problem is that now my wheels almost touch my calipers because they lean inwards a bit..
I need to push them back out so I have space in there again..
so you got a link to these camber bolts?
My problem is that now my wheels almost touch my calipers because they lean inwards a bit..
I need to push them back out so I have space in there again..
#7
RE: Caster/Camber Plates
^^ negative ghostrider.. lol
the wheels will clear the caliper better if the tilt is gone.. they are just leaning in too much and need to be balanced back out..
plus I heard that wheel spacers are bad for the car..
the 18" OEMs should fit the 6 no problem.. I just lowered mine 2" so I need to fix the camber..
I still got no links for products.. lol
the wheels will clear the caliper better if the tilt is gone.. they are just leaning in too much and need to be balanced back out..
plus I heard that wheel spacers are bad for the car..
the 18" OEMs should fit the 6 no problem.. I just lowered mine 2" so I need to fix the camber..
I still got no links for products.. lol
#8
RE: Caster/Camber Plates
the bolts are available at tire discounters, they will run you about 110 dollars installed and aligned. it was a simple fix and only take about an hour, i dont have a link that i can find, but search mustang camber bolts on google. but they should be readily available to install at tire discounters, its not a part they have to order.
#10
RE: Caster/Camber Plates
^^^ groovy dude.. lol
for the 110 for the bolts I ALMOST want to spend the extra $ and get the adj kit..
...nah
Thanks for your help!
I'll go check some local places tomorrow.
for the 110 for the bolts I ALMOST want to spend the extra $ and get the adj kit..
...nah
Thanks for your help!
I'll go check some local places tomorrow.