X-Charger Discussion Thread
1st Gear Member
Joined: Aug 2009
Posts: 120
From: Washington
https://www.vmpperformance.com/05-Mu...xsctune-l3.htm
Joined: Feb 2018
Posts: 21
From: Veneto
If it was me, I think I’d go with VMP. They give you 6 months of support and you can send them a data log if needed. You’re sure going to enjoy the X-Charger! It’s such seamless power with instant boost.
https://www.vmpperformance.com/05-Mu...xsctune-l3.htm
https://www.vmpperformance.com/05-Mu...xsctune-l3.htm
http://www.vmpperformance.com/VMP-Cu...-p/tune-l3.htm
Super Moderator
Joined: May 2006
Posts: 8,888
From: Michigan again!
Ok,I think I will go with them..but Wich product should I buy?I mean..I have to follow the link that you wrote on your post,or this one here..?
http://www.vmpperformance.com/VMP-Cu...-p/tune-l3.htm
http://www.vmpperformance.com/VMP-Cu...-p/tune-l3.htm
Joined: Feb 2018
Posts: 21
From: Veneto
All right,thanks! Because a guy from vmp perfromance told me to follow the second one,in an email that I've sent to them..but I tought that didn't fit my car.
Joined: Feb 2018
Posts: 21
From: Veneto
Ok..i have the 2,7 pulley on this kit..i'll specify everything..but one question..on the form for purchasing the tune they ask me for "Computer Code/Strategy/Part Number"...what they mean?they want the VIN of my car?
1st Gear Member
Joined: Aug 2009
Posts: 120
From: Washington
Also, X-Chargers only came with 3.0, 2.8, and 2.6 pulleys. The Xtreme uses a 2.6” pulley.
Joined: Feb 2018
Posts: 21
From: Veneto
Ok thanks!now I've understood what they want..but for the pulleys..the guy that sold me the charger here on this forum,wrote down that he have a 2,9 a 2,8 and a 2,7 pulleys..no 3,0 or 2,6..does he maybe confused the numbers of the bigger and the smaller ones?
1st Gear Member
Joined: Aug 2009
Posts: 120
From: Washington
Are you sure it’s an X-Charger and not maybe a ModdBox? Do you have a heat exchanger unit with the kit? It looks like a radiator.
Joined: Feb 2018
Posts: 21
From: Veneto