New Mustang Mod Mystery
#1
New Mustang Mod Mystery
Ok so I bought a 2011 Mustang GT Premium a few days ago and absolutely love the car. I know next to nothing about cars so i've resorted to scouring the internet trying to figure out what all is in the car. I'm going to post a few pictures here in hopes that someone who knows a lot more than me can spot some things and bring to light what all is in the car. So far I know it has some type of flowmaster exhaust, a CAI, and possibly a Boss 302 intake manifold added on (since I can't seem to find a 2011 factory Boss 302 version of the GT). I also know that it is missing the cap where you put freon in and am working on getting that replaced lol.
So! Any help would be very much appreciated. If anyone sees anything from the pictures that stands out that my inexperienced eyes cant see please let me know. Also if more pictures are required let me know ill be glad to go out in the driveway to try and get better angles. Thanks in advance!
So! Any help would be very much appreciated. If anyone sees anything from the pictures that stands out that my inexperienced eyes cant see please let me know. Also if more pictures are required let me know ill be glad to go out in the driveway to try and get better angles. Thanks in advance!
#2
New Mustang Mod Mystery
Titanburner, what I would do, or have done, is cap off the "AIRAID Cold Air Intake tube" coming from your AIRAID to the drivers side firewall. Also, I would, or have done, is install a "Oil Separator." The one on the passengers side that connects to the PCV valve. If you were aspirated, I would suggest a separator on both sides. I know some of the mustang owners say there is no benefit from having the separator, but I drain my separator at least once every three months. And no, my engine is tight as a nats butt over a rain barrel. Best of wishes.
#3
that's not a stock airbox... I think the 2011 had cold air intake, but sealed. Maybe you can find one on eBay.
The valve cover "Powered by Ford" I'm not sure that's OEM, or aftermarket...looks cool though.
Yeah, I don't recall a BOSS 302 GT from 2011 either.
Should be this
The valve cover "Powered by Ford" I'm not sure that's OEM, or aftermarket...looks cool though.
Yeah, I don't recall a BOSS 302 GT from 2011 either.
Should be this
Last edited by GT Nate; 07-23-2018 at 12:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
03-10-2016 12:56 PM
kat70fastback
Mustang News, Concepts, Rumors & Discussion
2
07-28-2011 07:46 AM