I never believed it.......
....when i'd been told I yanked a tire.......
http://www.photoreflect.com/scripts/...um=0&adjust=-1
http://www.photoreflect.com/scripts/...um=0&adjust=-1
Finally someone obviously caught it on film after a year of doing it......
http://www.photoreflect.com/scripts/...um=0&adjust=-1
http://www.photoreflect.com/scripts/...um=0&adjust=-1
Finally someone obviously caught it on film after a year of doing it......
Rear:
BBK lowering springs cut 1 full coil, air bags in both rear springs, MM drag lowers, FRPP uppers(stock'96 & up uppers), 4.10 gear, 31 spline axels, explorer diff w\stock clutch pack, 26x8.5" M\T drag slicks at 11-12psi.....
Front:
Gabriel P.O.S. worn out struts, 4 cylinder front springs, no sway bar.
Key notes: 3075lbs with driver, T5Z 2.95 first gear, dropping the hammer at 6,000+ rpm(not for the faint of heart), 300\300rear wheel horsepower& torque.
RPMII intake, AFR 165 heads, 70mm TB, 75MM Pro M, shorty "unequal" headers, Magnaflow x-pipe with cat's
, Flowmaster cat-back, stock shortblock(302cid\rebearinged only), 1.6 RR's, custom roller cam & lifter set(5.10 I \ 5.15 E. \ 114LSA \ 225+@.050), electric fan, no air, all other accessories still there(P.S., smog pump, alt., WP), MSD6AL, Diablo revolution dyno burned chip.
BBK lowering springs cut 1 full coil, air bags in both rear springs, MM drag lowers, FRPP uppers(stock'96 & up uppers), 4.10 gear, 31 spline axels, explorer diff w\stock clutch pack, 26x8.5" M\T drag slicks at 11-12psi.....
Front:
Gabriel P.O.S. worn out struts, 4 cylinder front springs, no sway bar.
Key notes: 3075lbs with driver, T5Z 2.95 first gear, dropping the hammer at 6,000+ rpm(not for the faint of heart), 300\300rear wheel horsepower& torque.
RPMII intake, AFR 165 heads, 70mm TB, 75MM Pro M, shorty "unequal" headers, Magnaflow x-pipe with cat's
, Flowmaster cat-back, stock shortblock(302cid\rebearinged only), 1.6 RR's, custom roller cam & lifter set(5.10 I \ 5.15 E. \ 114LSA \ 225+@.050), electric fan, no air, all other accessories still there(P.S., smog pump, alt., WP), MSD6AL, Diablo revolution dyno burned chip.
Thanks for the kind words; but it most definetly is not a beast......yet. I have a nitrous wet system mostly hooked up & needing only about $300 more in parts to make dead safe(dyno'd 370rwhp &380rwtq on a 70 shot....)......
Ummmm..... let's not go there. I'm already about as intimidated as I can be whilst in the gym locker room as it is.... LOL

ORIGINAL: AmericanMuscle4.6GT
.....and i guarantee at least 3 more inches. wouldnt it be better to get 3 more inches? lol......
.....and i guarantee at least 3 more inches. wouldnt it be better to get 3 more inches? lol......
ORIGINAL: Twister
Tony, I just told jenn about this, and she asked "who is he again", to which I replied..."Tony, the guy with the smelly stang"
Tony, I just told jenn about this, and she asked "who is he again", to which I replied..."Tony, the guy with the smelly stang"
Thread
Thread Starter
Forum
Replies
Last Post



