z06 Dyno sheet
2nd Gear Member
Joined: May 2006
Posts: 175
From:
RE: z06 Dyno sheet
Very nice numbers!!! i cant wait to start tunin mine - so excited. You have to be really excited to get it out to the track with those new numbers!!
Where in tampa are you going to race? I know that rev-extreme is sponsoring a corvette challenge down in Bradenton.
oh, and just so you know, unless im mistaken, xxkaz3prxx can just about keep up with a NEW Z06(so says his thread), so be warry of challenging him :P
again, nice numbers, hopefully ill see you around the tracks!
Where in tampa are you going to race? I know that rev-extreme is sponsoring a corvette challenge down in Bradenton.
oh, and just so you know, unless im mistaken, xxkaz3prxx can just about keep up with a NEW Z06(so says his thread), so be warry of challenging him :P
again, nice numbers, hopefully ill see you around the tracks!
Thread Starter
2nd Gear Member
Joined: Nov 2005
Posts: 294
From:
RE: z06 Dyno sheet
ORIGINAL: phrkshw
Very nice numbers!!! i cant wait to start tunin mine - so excited. You have to be really excited to get it out to the track with those new numbers!!
Where in tampa are you going to race? I know that rev-extreme is sponsoring a corvette challenge down in Bradenton.
oh, and just so you know, unless im mistaken, xxkaz3prxx can just about keep up with a NEW Z06(so says his thread), so be warry of challenging him :P
again, nice numbers, hopefully ill see you around the tracks!
Very nice numbers!!! i cant wait to start tunin mine - so excited. You have to be really excited to get it out to the track with those new numbers!!
Where in tampa are you going to race? I know that rev-extreme is sponsoring a corvette challenge down in Bradenton.
oh, and just so you know, unless im mistaken, xxkaz3prxx can just about keep up with a NEW Z06(so says his thread), so be warry of challenging him :P
again, nice numbers, hopefully ill see you around the tracks!
I wasn't challenging...just wondering what has been done since the "old dyno," I'm only a Full second of a new Z06 stock.
Lol.Josh
5th Gear Member
Joined: Jul 2004
Posts: 4,438
From: St. Louis
RE: z06 Dyno sheet
ORIGINAL: SSteele
No, you're comparing a 2.8L to a 5.7L. 
ORIGINAL: WRXtranceformed
Maybe on the pump gas map
Yeah, it's really kind of an apples to oranges comparison Tommy. I mean, you're comparing 2.8L to 7 right? =P There's going to be a ton more torque in the lower rpms because of the displacement difference. I just thought that overlay was funny, a guy on one of the Subaru forums did it randomly.
Maybe on the pump gas map
Yeah, it's really kind of an apples to oranges comparison Tommy. I mean, you're comparing 2.8L to 7 right? =P There's going to be a ton more torque in the lower rpms because of the displacement difference. I just thought that overlay was funny, a guy on one of the Subaru forums did it randomly.
2nd Gear Member
Joined: May 2006
Posts: 175
From:
RE: z06 Dyno sheet
oh sweet - well i dont know if i will see you at the vette thing, seeing as i might get beat up and thrown out [8D] ya know, for drivin a ford.... but i am headin there on this thursday to play on the strip and see what my stang will do stock. so maybe i will see you around town.
where do you live? Tampa?
where do you live? Tampa?
6th Gear Member
Joined: Oct 2003
Posts: 8,635
From: North Cackilacky
RE: z06 Dyno sheet
ORIGINAL: TommyV8
The C6 Z06 has a 7.0L V8. The C5 Z06 has a 5.7.
The C6 Z06 has a 7.0L V8. The C5 Z06 has a 5.7.
5th Gear Member
Joined: Jul 2004
Posts: 4,438
From: St. Louis
RE: z06 Dyno sheet
ORIGINAL: 98LS1
I don't know if you thought SS was wrong, or was just telling WRX which is which, but we're talking about a C5 ZO6.
ORIGINAL: TommyV8
The C6 Z06 has a 7.0L V8. The C5 Z06 has a 5.7.
The C6 Z06 has a 7.0L V8. The C5 Z06 has a 5.7.
ORIGINAL: WRXtranceformed
Nice numbers dude! I can't wait to get my Vette
Here's my STi's pump gas map overlaid onto a C6 Z06 dyno. This was done with the same dyno, same correction and everything. Not bad for a 4 banger at half it's potential eh? =P
(on race gas I'm putting down over 100whp/100wtorque over a stock Z06)
Nice numbers dude! I can't wait to get my Vette
Here's my STi's pump gas map overlaid onto a C6 Z06 dyno. This was done with the same dyno, same correction and everything. Not bad for a 4 banger at half it's potential eh? =P
(on race gas I'm putting down over 100whp/100wtorque over a stock Z06)
Thread Starter
2nd Gear Member
Joined: Nov 2005
Posts: 294
From:
RE: z06 Dyno sheet
Yeah, He compared his WRX to a C6 Z06, not a C5 Z06. This is a confusing thread now
.
phrkshw I actually live in Winter Haven about 40 or so miles from Tampa. I go to USF, nice commute huh? I will be out there Saturday, so if you stop by cool, I'll have the Electron Blue Z06. You shouldn't miss it[8D]. Like it will be the only one there. I'm pretty sure I'll be able to identify you with your black stang. You should stick out if you go. Either way run your Stang and report back with some timeslips or numbers, doesn't bother me.
Josh
.phrkshw I actually live in Winter Haven about 40 or so miles from Tampa. I go to USF, nice commute huh? I will be out there Saturday, so if you stop by cool, I'll have the Electron Blue Z06. You shouldn't miss it[8D]. Like it will be the only one there. I'm pretty sure I'll be able to identify you with your black stang. You should stick out if you go. Either way run your Stang and report back with some timeslips or numbers, doesn't bother me.
Josh
4th Gear Member
Joined: Aug 2004
Posts: 1,017
From: daytona beach, FL
RE: z06 Dyno sheet
ORIGINAL: V6yellowStang
First of all Mr. Rogers, yes I love my car. It has little things I need to fix that the original owner broke and got tired off like the SunVisor clip and the right window wont go down, but these things are easy to do and small enough to not worry about considering what I got. I've got plans for this car. I'm working at them already.
Blazer, I will be out at Orlando Speedway Oct 3rd for a Corvette Challenge, maybe we can meet up there and get a grudge match run or something. It will be the second time I've run the car on a track. The first will be this Saturday In Tampa for another Corvette Challenge sponsored by another company, the same one that did my tune and work yesterday. PM me if you want to try and do something else. I'm willing to go out for a test and tune night or something, just give me a little heads up and I'll try and make it happen.
Josh
First of all Mr. Rogers, yes I love my car. It has little things I need to fix that the original owner broke and got tired off like the SunVisor clip and the right window wont go down, but these things are easy to do and small enough to not worry about considering what I got. I've got plans for this car. I'm working at them already.
Blazer, I will be out at Orlando Speedway Oct 3rd for a Corvette Challenge, maybe we can meet up there and get a grudge match run or something. It will be the second time I've run the car on a track. The first will be this Saturday In Tampa for another Corvette Challenge sponsored by another company, the same one that did my tune and work yesterday. PM me if you want to try and do something else. I'm willing to go out for a test and tune night or something, just give me a little heads up and I'll try and make it happen.
Josh
did u mean DEC 3rd? as OCT was last month ( unless u can go back in time ) haha.
do u know what day it is going to be? wed or friday, or funday sunday? if it is on a sunday, count me in, as them are the best track prep days.