WS6 vs Go-Ped
Administrator
Joined: Nov 2002
Posts: 16,186
From: yep
RE: WS6 vs Go-Ped
you have an LSX powered vehicle, so per my previous point, it would be senseless for me to race you in anything of mine, as i do not have an LSX powered vehicle. plus,the only car that i have in any sort of race form is the DSM, so you would have to spot me 3 or so seconds to make it even, plus another half hour for me to stop and fix things at half track...as it is a DSM...
1st Gear Member
Joined: Feb 2006
Posts: 85
RE: WS6 vs Go-Ped
It is fake, I used build race engines for gopeds and used to race them when there was the racing sanctions. There is no possible way to get a goped that fast unless you strap a jet engine to it ahah. There is no suchthing as a GRZ43 stroker reed valve motor. At 23000 rpms, these little heads are super prone to cracking down the side on the transfer ports. Hell youre lucky to push 19-21k without them cracking or siezing. And these gopeds are direct drive, at least the ones in the video. so whatever specs they put for clutch and 4 speeds,is a lie. theres no room for transmission and clutch with these lil scooters. And notice they have like three different scooters in the video, the first one with an g230rc and then they show the nitrous lines on a stock g23lh. and the one in the video sounded stock.
6th Gear Member
Joined: Jun 2006
Posts: 11,565
From: Jersey
RE: WS6 vs Go-Ped
Jeez ,I get so tired of spotting everyone 3 second leads like ROTM asked for.Nice repost on the video. Always cracks me up when he flips off the LS1 and purges the N20. I'm a little embarassed for you guys for the debate on if it's real or not Though. 
Nice repost on the video. Always cracks me up when he flips off the LS1 and purges the N20. I'm a little embarassed for you guys for the debate on if it's real or not Though.
5th Gear Member
Joined: Mar 2006
Posts: 3,758
From:
RE: WS6 vs Go-Ped
ORIGINAL: RonnieD
It is fake, I used build race engines for gopeds and used to race them when there was the racing sanctions. There is no possible way to get a goped that fast unless you strap a jet engine to it ahah. There is no suchthing as a GRZ43 stroker reed valve motor. At 23000 rpms, these little heads are super prone to cracking down the side on the transfer ports. Hell youre lucky to push 19-21k without them cracking or siezing. And these gopeds are direct drive, at least the ones in the video. so whatever specs they put for clutch and 4 speeds,is a lie. theres no room for transmission and clutch with these lil scooters. And notice they have like three different scooters in the video, the first one with an g230rc and then they show the nitrous lines on a stock g23lh. and the one in the video sounded stock.
It is fake, I used build race engines for gopeds and used to race them when there was the racing sanctions. There is no possible way to get a goped that fast unless you strap a jet engine to it ahah. There is no suchthing as a GRZ43 stroker reed valve motor. At 23000 rpms, these little heads are super prone to cracking down the side on the transfer ports. Hell youre lucky to push 19-21k without them cracking or siezing. And these gopeds are direct drive, at least the ones in the video. so whatever specs they put for clutch and 4 speeds,is a lie. theres no room for transmission and clutch with these lil scooters. And notice they have like three different scooters in the video, the first one with an g230rc and then they show the nitrous lines on a stock g23lh. and the one in the video sounded stock.
It was proven fake several years ago, and the persons in the video admitted to it. However, unless they did some serious sound-clip editing, that go-ped has at least a 3-speed transmission because it clearly shifts twice.
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
5th Gear Member
Joined: Jun 2007
Posts: 2,176
From: Decatur AL USA
RE: WS6 vs Go-Ped
ORIGINAL: Sleeper05
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
5th Gear Member
Joined: Mar 2006
Posts: 3,758
From:
RE: WS6 vs Go-Ped
ORIGINAL: Gene K
I dont know how effective it is but it isdone on 2-Stroke Racing Outboards and Snowmobiles.
ORIGINAL: Sleeper05
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
All kidding aside, it would just take a lot more effort. You can't simply "hook it up" like on you can (for smaller shots at least) on a car engine.
Wash Rinse Repeat
Joined: Feb 2006
Posts: 6,312
From: Michigan
RE: WS6 vs Go-Ped
ORIGINAL: Sleeper05
I find it much more effective on 4-stroke lawnmowers, myself.
All kidding aside, it would just take a lot more effort. You can't simply "hook it up" like on you can (for smaller shots at least) on a car engine.
ORIGINAL: Gene K
I dont know how effective it is but it isdone on 2-Stroke Racing Outboards and Snowmobiles.
ORIGINAL: Sleeper05
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
My favorite part is how everyone is so quick to believe that you can run nitrous effectively on a 2-stroke motor...
All kidding aside, it would just take a lot more effort. You can't simply "hook it up" like on you can (for smaller shots at least) on a car engine.
these are nitrous injected 2-strokes that are purpose built for speed
Thread
Thread Starter
Forum
Replies
Last Post
ericdiver
4.6L (1996-2004 Modular) Mustang
18
Dec 22, 2005 10:59 PM
