Got myself a Terminator!
Hellion or Racer walsh kit??????
08-28-2007, 09:34 PM
#32
4th Gear Member
Join Date: Jul 2006
Location: Pittsburg, CA (BAY AREA!)
Posts: 1,399
RE: Got myself a Terminator!
Since you already have an upper pulley, you can get a port job and go with a lower next. Or just straight up go twin screw.
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
08-29-2007, 12:30 PM
#33
1st Gear Member
Thread Starter
Join Date: Jan 2007
Posts: 54
RE: Got myself a Terminator!
ORIGINAL: PWORLDSTANG
Since you already have an upper pulley, you can get a port job and go with a lower next. Or just straight up go twin screw.
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
Since you already have an upper pulley, you can get a port job and go with a lower next. Or just straight up go twin screw.
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
Can I just measure it?
08-30-2007, 02:50 PM
#35
4th Gear Member
Join Date: Jul 2006
Location: Pittsburg, CA (BAY AREA!)
Posts: 1,399
RE: Got myself a Terminator!
ORIGINAL: forbanger
Can I just measure it?
ORIGINAL: PWORLDSTANG
Since you already have an upper pulley, you can get a port job and go with a lower next. Or just straight up go twin screw.
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
Since you already have an upper pulley, you can get a port job and go with a lower next. Or just straight up go twin screw.
Since you don't know what size pulley you have, If you take a picture of your pulley and post it, one of usshould be able to tell you what size it is..
Can I just measure it?
08-31-2007, 08:28 PM
#36
2nd Gear Member
Join Date: Jul 2006
Posts: 333
RE: Got myself a Terminator!
Congratulations on the 10th Anniversary purchase. Nice looking car! I know you're going to enjoy the heck out of it. The biggest problem with the Terminator is deciding what to do first since there are so many mods/options available now. It's way easy to make BIG power with the car. Maybe too easy! Blessing and a curse ya know! :-)
09-01-2007, 11:14 PM
#37
1st Gear Member
Thread Starter
Join Date: Jan 2007
Posts: 54
RE: Got myself a Terminator!
Hey Guys,
Thanks again for all the replies!
I figured out what the size was by measuring it, it's a 2.8.
One thing that still bugs me is the sound. It is so so so LOUD. I am woundering if I should replace my X pipe to a catted one? If so anyone recomend a good pipe where I wouldn't loose much performance?
Thanks!
Thanks again for all the replies!
I figured out what the size was by measuring it, it's a 2.8.
One thing that still bugs me is the sound. It is so so so LOUD. I am woundering if I should replace my X pipe to a catted one? If so anyone recomend a good pipe where I wouldn't loose much performance?
Thanks!
09-04-2007, 12:23 AM
#38
2nd Gear Member
Join Date: Apr 2007
Location:
Posts: 166
RE: Got myself a Terminator!
Hey, i'm looking at the identical car, one i'm looking at has 19K miles but is stock. Its also a black 10th Anniversay, I love the look of them.
Congrats on the car, really hope everything works out and I have mine by weekend.
Congrats on the car, really hope everything works out and I have mine by weekend.
09-05-2007, 01:46 PM
#40
4th Gear Member
Join Date: Jul 2006
Location: Pittsburg, CA (BAY AREA!)
Posts: 1,399
RE: Got myself a Terminator!
ORIGINAL: forbanger
Hey Guys,
Thanks again for all the replies!
I figured out what the size was by measuring it, it's a 2.8.
One thing that still bugs me is the sound. It is so so so LOUD. I am woundering if I should replace my X pipe to a catted one? If so anyone recomend a good pipe where I wouldn't loose much performance?
Thanks!
Hey Guys,
Thanks again for all the replies!
I figured out what the size was by measuring it, it's a 2.8.
One thing that still bugs me is the sound. It is so so so LOUD. I am woundering if I should replace my X pipe to a catted one? If so anyone recomend a good pipe where I wouldn't loose much performance?
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
logan409
4.6L (1996-2004 Modular) Mustang
10
09-26-2015 07:43 PM
