How to launch?
3rd Gear Member
Joined: Dec 2004
Posts: 526
From:
RE: How to launch?
ORIGINAL: Blownsvt
if he slips the cluthc at 3k it sould bog him down a bit to around 2k or so before he sees the power. thats what i did to cut the 1.9's on my street tires the first time i went to the track. definitly get it tuned befor you go racing. you can try DB performance in Rogers, or Hi tech in elk river. i persnally use db and like the work that dan does there. You might have trouble getting it in for tuning on such short notice though. again do not race it or get hard into boost without a tune.
if he slips the cluthc at 3k it sould bog him down a bit to around 2k or so before he sees the power. thats what i did to cut the 1.9's on my street tires the first time i went to the track. definitly get it tuned befor you go racing. you can try DB performance in Rogers, or Hi tech in elk river. i persnally use db and like the work that dan does there. You might have trouble getting it in for tuning on such short notice though. again do not race it or get hard into boost without a tune.
Banned
Joined: Aug 2007
Posts: 2,463
From: AZ
RE: How to launch?
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
Thread Starter
1st Gear Member
Joined: Jul 2007
Posts: 53
RE: How to launch?
ORIGINAL: mfj
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
5th Gear Member
Joined: Jul 2006
Posts: 2,407
From:
RE: How to launch?
ORIGINAL: mfj
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
5th Gear Member
Joined: Jun 2006
Posts: 2,191
RE: How to launch?
ORIGINAL: Blownsvt
hopefully will be doing that and running high8's low 9's by the end of next season.
ORIGINAL: mfj
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
how to launch: get a 9 in. solid rear axle, a dual disc clutch, and some mickey thompson ET drags.
heat tires inburn out box
bounce on 7000 rpm rev limiter
on green, dump the clutch!
yeah, this was a joke, hehe.
Thread
Thread Starter
Forum
Replies
Last Post
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
Sep 14, 2015 08:46 PM