400rwhp
#5
RE: 400rwhp
well a h/c/i cobra with full bolt on's should lay around 415rwhp. and should also lay you on your back for good with the cost!!!!
the most i have seen was naz at svtperformance.com with 457 rwhp n/a on a 99 cobra
the most i have seen was naz at svtperformance.com with 457 rwhp n/a on a 99 cobra
#7
RE: 400rwhp
headers, intake, cnc ported head,bigger cam should be pretty close maybe alittle shy you could stroke it but $$$, higher static compression maybe
fuel will be the big problem
here in california i can only get 91 octane at the pump and theres that smog thing for 1975 and newer
I run 110 leaded mixed with 91 in my 428scj for the 11.6:1 static comp the motor is stock besides alittle higher comp due to the milling of the heads and headers
365 na rwhp @ and 550ft\lbs of torque its a monster!
fuel will be the big problem
here in california i can only get 91 octane at the pump and theres that smog thing for 1975 and newer
I run 110 leaded mixed with 91 in my 428scj for the 11.6:1 static comp the motor is stock besides alittle higher comp due to the milling of the heads and headers
365 na rwhp @ and 550ft\lbs of torque its a monster!
#8
RE: 400rwhp
ORIGINAL: limp1969
we must not be talking about a 03\04
supercharge it, headers, cold air intake =400rwhp
we must not be talking about a 03\04
supercharge it, headers, cold air intake =400rwhp
Thread
Thread Starter
Forum
Replies
Last Post
nick_thames
4.6L (1996-2004 Modular) Mustang
16
09-03-2006 09:06 PM