Archive - Trades & Freebies If you are looking for a trade, or have something to get rid of, no money involved, post it here.

NICE 1968 Ford F100 trade for..? What do you have?

 
Thread Tools
 
Search this Thread
 
Old 10-06-2007, 03:45 PM
  #1  
S197GT
Thread Starter
 
S197GT's Avatar
 
Join Date: Aug 2007
Posts: 16
Default NICE 1968 Ford F100 trade for..? What do you have?




http://www.cardomain.com/ride/2242533

I'm in North Carolina. Looking to trade for..What do you have?

Just make an offer. I've got WAY too much invested.

List:

Suspension/Brakes/Steering:
1969 F-100 steering column with all wiring/ turn signals, blue painted.
NOS turn signal switch with all wiring new.
'68 3 spoke steering wheel, gloss black, with F100 horn button. Dual Horns.
New FoMoCo steering coupler
1969 Ford power steering gearbox
1974 Ford F100 pitman arm, like new, no gauding
New '78 Ford F100 tie rod, made in USA
New '78 Ford F-100 drag link, made in USA
New tie-rod to drag link coupler, made in USA
'78 F-100 SWB Custom Disc brake spindles, I-beams, Springs, Radius Arms, Shock absorbers, disc brake dust shields
New axle pivot bushings, OEM Ford, pressed in
New Radius arm Bushings, OEM Ford
'73-'79 Disc brake proportioning valve, custom mounted in frame
New brake rotors
Remanufactured Brake calipers (Ford)
New brake pads
New rubber brake hoses
New Custom bent brake lines to Proportioning valve to each wheel and master cylinder.
(x2) '78 F100 metal passenger side bolt on brake hose brackets
All new brass brake line fittings
Everything fully degreased, sanded, and painted
New cotter pins
New wheel bearings and races
New dust caps
New grease zerks
Valvoline bearing grease
New grease caps
1976 F100 power brake booster mounting bracket and pushrod
1969 power steering column collar with weatherstripping
New power brake booster, Bendix
New master cylinder, Bendix
New power steering pressure hose
New power steering return hose
'69 Power steering cooler
Remanufactured '69 power steering pump
'69 P/S pulley
'69 P/S bracket for use with no a/c
Front axles aligned professionally at alignment shop that has been aligning I-beams for 30+ years.
New InLine Tube rear axle Crossover brake lines, steel.
1969 good rear drums (never been turned)
New rear brake shoes
New rear wheel cylinders
All new rear brake springs and hardware
New BF Goodrich T/A tires on chrome rims

Transmission/Rear End:
1969 C6 Big Block trans.
All new seals/screen
New Trans Filter
New modulator valve
Metal vaccum line to intake/mod valve, with new vacc. lines
New Flywheel
New InLine Tube Transmission cooler lines
1969 One-piece heavy duty SWB driveshaft
9 3/8" rear axle, 38 spline axles, 3:50:1 ring and pinion, non locking, wet sanded, primed and painted gloss black.
Timken wheel seals

Engine:
1969 390 FE Block
Fully machined, vat cleaned, bored, surfaced
Bored 0.030" on pistons
Bored 0.010" on crankshaft
Re-ground and polished stock crankshaft (390)
New cleveite main bearings, 0.010
Honed torque plate
New freeze plugs
New Federal Mogul piston rings
Keith Black Silv-0-Lite new pistons/rings/wrist pins/ everything
New valve guides and seats
Stock re-conditioned 390 connecting rods
Clevite rod bearings
New Camshaft made for low end torque
Stock straight pushrods
Fel-Pro Perma Torque multi layer steel head gaskets
ALL other new gaskets
Cross bolted main bearings
Clevite cam bearings
Melling timing gearset and chain
Stock oil slinger
Reman. Ford signature series water pump, painted Ford Blue
Ford 6 Blade Flex fan and fan hub spacer
Melling High Volume oil pump
Stock 1969 Harmonic balancer, good condition
Clevite oil pump shaft and umbrella, hardened
Stock vat boiled 2V 390 truck intake
289 2v metal carb spacer
New Carb spacer gaskets
All 1969 Braketry and oil dipstick
FE one groove WP pulley
FE two groove Crank pulley
FE high Mount alternator brackets.
1969 Stock rockers, clips, retainers and lifters
New 180 deg. Thermostat
New Autolite AP45 platinum plugs
New Motorcraft belts
Remanufactured Autolite starter
New style Motorcraft Chrome voltage regulator
Remanufactured Autolite alternator
New motorcraft radiator cap
1979 Ford F150 pressure tested 3-row radiator, wet sanded, gloss black
New radiator hoses and all new hose clamps
New fuel line hose/ clamps
NOS fuel filter sediment bowl
New Fuel filter
Stock good fuel pump
Resurfaced stock heads, very light porting/surfacing
Oversize stainless steel 2.05" CJ valves. (stock springs)
New Battery
New Dennis Carpenter powder coated battery tray
New Dennis carpenter battery hold down strap
Stock exhaust manifolds, ground down smooth and resurfaced
New hardened grade 8 manifold bolts
Remanufactured Autolite distributor
Pertronix Ignitor breakerless ignition system.
Pertronix Flamethrower I 40,000 volt coil
New Autolite distributor cap
New motorcraft distributor rotor button
New Autolite 7mm High Static Suppression spark plug wires
Fel-Pro silver exhaust manifold heat shields
1969 F100 breather, fully sanded and painted with all new decals
New water shutoff valve
New Motorcraft heater hose and clamps
1968 F-250 heat riser, painted
1969 F100 Oil filler cap with mesh removed from inside
New PCV valve, motorcraft
New PCV hose
New vaccum advance line
Remanufactured TomCo Autolite 2v Carburetor
Single bar throttle cable from small-block Ford.
ALL new wiring from the coil and back
New battery cables
New starter solenoid
New water temperature sending unit
Motorcraft FL-1A oil filter
New looking ?? Exhaust pipes (true dual, no cats)
New Looking ?? No name mufflers

Interior:
Custom painted 1969 instrumentation panel
Polished all paint inside of truck with polishing compound
New Cargo Light decal
Like-new ***** and bezels from parts truck
Fully polished headliner trim
1969 F100 Gas tank and sending unit. All new clamps. No trash or rust in the tank. Painted Gloss Black.
New door perimeter weatherstripping
Exterior:
New gas cap
New gas cap filler neck grommet and hose
Like new door handles
Installed better cargo light
Like new taillight lenses
New Old Stock 1969 Headlight Doors

Parts Included with the Purchase of the Truck:
(2) Like new RUST FREE PERFECT front Fenders drilled for "390" fender emblems.
(2) Rust free doors, driver and passenger
(1) Rust Free hood. Has a small fixable bend on the cowl
(1) Spare tailgate, decent shape.
(1) Set of NOS chrome fender trim.
(1) WHOLE SET of NOS Chrome tailgate moldings
(1) NOS front window seal
(1) NOS rear window seal

S197GT is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
drfister
2005-2014 Mustangs
11
05-03-2018 10:38 PM
JonnyBlazeGT
Archive - Mustangs For Sale
3
11-03-2015 01:10 AM
kdryan
2005-2014 Mustangs
7
08-21-2015 04:01 PM
rakesh544
New Member Area
2
08-19-2015 06:23 AM
jink21
Members Rides and Car Show Section
3
08-13-2015 04:33 PM



Quick Reply: NICE 1968 Ford F100 trade for..? What do you have?



All times are GMT -5. The time now is 08:29 PM.