So Bama sent me a config file to datalog my car bc of a pinging issue. Everytime I loaded it though the PID's failed to load. I called SCT and they told me to manually select them. I tried my best to search for the PID's and I'm not exactly sure if I got what he wanted. Anyways I just emailed it off, but while I wait I wanted to postmy data logs. This is my first time and I read that this software is buggy and isn't great at capturing long sections of data so I broke it up the data logs.

I ran and saved files of each of the following

- 2 idle runs

- 2 (3-5 min) normaal drving

- 2 WOT (I definitely heard a ping at top of 2nd gear first run but not sure about 2nd bc I had windows down

http://www.filedropper.com/idle293r_1

http://www.filedropper.com/idle293r

http://www.filedropper.com/drive193r

http://www.filedropper.com/drive293r

http://www.filedropper.com/wot293r

http://www.filedropper.com/wot193r1s...dpinghighin2nd

 

you didn't log a lot of vital parameters, what fuel are you running?

 

I'm running shell 93 octane... I was given a config file tht didn't load the pids so I did my best to search for all of the pids on my config file. Can you specify which parameters I am missing? Thanks

 

I am interested in knowing which PIDS/DMR's work for the S197's. Specifically related to the fuel system.