I know most of you are gonna laugh and turn this thread into a whorefest but i got a question for ya, i was going to replace my pcv valve on the passenger side valve cover as my haynes book says. but when i pulled the line there was no pcv valve on there. moved to my driver side valve cover and the pcv valve was on that side. the question to you is does it matter which side the valve is on? thanks to everyone who stays on topic here

 

It's on the drivers side. I did the same thing 2 days ago. I'm going to eventually remove both of those hoses and use breathers instead.

Ryan

 

same im goin wit breathers and egr delete

 

would it matter if i put the valve on the passenger side? the fram valve i bought does not fit in the elbow on the drivers side but does fit the hose on the passenger side

 

Yes it matters. I have a purolator in mine, it came with 3 adapters, since it needs an elbow for my car. Got it at Advanced Auto Parts.

Ryan

 

i used a fram also...it comes with different adapters and it fits in the drivers side valve cover

 

Why use breathers? They leak oil all down your valve covers. Why not just put in an oil separator instead? Your engine will stay clean and it will still pass smog.

 

cuz im putting a eaton m112 on my car and i dont feel liek dealing with all that ****

 

That's a good reason

 

does this add more power?