V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

Some questions about my stang

Thread Tools
 
Search this Thread
 
Old 06-16-2007, 02:53 PM
  #1  
HARFORD
2nd Gear Member
Thread Starter
 
HARFORD's Avatar
 
Join Date: Mar 2007
Location:
Posts: 301
Default Some questions about my stang

okay so i just bought a v6 98 vert. I love it 5 speed shifts great and all, ill get pics up later. question though, when i turn my steering wheel it makes a kindof specking noise like you would here out of a door that needs lube, there is fluid i dont know if some metal pieces need lube inside the colum. and second when i let the clutch out all the way it makes a low siren noise like idk but what could this all be?

p.s. car has 170,000 miles and is in great condition for that many miles
HARFORD is offline  
Old 06-16-2007, 04:10 PM
  #2  
98ponycar
2nd Gear Member
 
98ponycar's Avatar
 
Join Date: May 2004
Location:
Posts: 331
Default RE: Some questions about my stang

Are you sure that your noise is coming from the steering column? It sounds like a balljoint issue. On those particular balljoints, Ford didn't build them with grease zerts, and over time they become dry. I know 170,000 is a lot of miles for original balljoints, but my 98 has 250,000 and it still has the originals.

The noise you're talking about when the pedal is up sounds like a lack of lube on the release bearing. You can remove your inspection plate and apply a small amount of high temp grease to the release bearing on the front where it makes contact with the pressure plate. That should take care of your problem.

With all that said, it's pretty hard to diagnose something on a computer without actually being able to see and hear the symptoms.
98ponycar is offline  
Old 06-16-2007, 09:33 PM
  #3  
HARFORD
2nd Gear Member
Thread Starter
 
HARFORD's Avatar
 
Join Date: Mar 2007
Location:
Posts: 301
Default thanks

thanks alot, now one more question where is the inspection plate
HARFORD is offline  
Old 06-17-2007, 06:25 AM
  #4  
98ponycar
2nd Gear Member
 
98ponycar's Avatar
 
Join Date: May 2004
Location:
Posts: 331
Default RE: thanks

The inspectioncover is a piece of thin aluminum that is held on with one bolt on the left side of the bellhousing. Just follow your clutch cable to the bellhousing and you will see your inspection cover.
98ponycar is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
12-19-2023 01:12 PM
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
AMAlexLazarus
AmericanMuscle.com
3
10-02-2015 08:06 AM
UrS4
S197 Handling Section
1
09-30-2015 10:13 AM
treesloth
New Member Area
4
09-28-2015 07:03 AM



Quick Reply: Some questions about my stang



All times are GMT -5. The time now is 01:58 AM.