Possible computer problem
Mustang 96 v6 obd2 engine management.
Car started spluttering as though running out of gas, pulled over & stopped engine. With key on engine off I can hear rapid clicking like relays or solenoids.While this is happening the CEL is flickering rapidly, the fan tries to run with engine cold . The engine will start for a while but extremely lumpy & uneven idle, it wont run for long & eventually splutters to a halt. With scantool connected vehicle sensors read intermittently & erratically. Eventually the computer vehicle status loses connection with the scantool & readings are lost.
Anyone know or have ideas?
Regards Aeroman.
Car started spluttering as though running out of gas, pulled over & stopped engine. With key on engine off I can hear rapid clicking like relays or solenoids.While this is happening the CEL is flickering rapidly, the fan tries to run with engine cold . The engine will start for a while but extremely lumpy & uneven idle, it wont run for long & eventually splutters to a halt. With scantool connected vehicle sensors read intermittently & erratically. Eventually the computer vehicle status loses connection with the scantool & readings are lost.
Anyone know or have ideas?
Regards Aeroman.
I've got a feeling the CCRM is on the way out or I have a bad electrical connection somewhere.
Thread
Thread Starter
Forum
Replies
Last Post



