Shaunmac9128

I know, just letting you know and sometimes some SSM ones pop up. For more though. You can run a cam on stock heads...no?

Richbrad08

if i could then how hard is it to install a cam, b/c my brother-in-law works on cars..but... he always working on the cars he has worked on...so i kinda dont trust him.

Richbrad08

i mean since i am installing the m112 how hard will it be to install the cam...

Shaunmac9128

Well I mean I've seen it done, and it looks relatively simple but I know its not as easy as it looks. I don't know if I would trust myself.

LilRoush

Cam is a bit more involved than the super charger. I'd have someone with you who has done a pushrod motor before.

Richbrad08

Thinking...thinking....how many friends work on push rod motors.....crap i am screwed.

LilRoush

Oh I forgot to tag on that if you are willing to have car down for a bit, you can port your current heads at almost any local machine shop. Or buy a set of stock heads and have them done prior to tearing your motor apart.

Richbrad08

Ya i was thinking on that....How much do you think it will cost?

LilRoush

Depends on your local shop and their rates. I've done them for a couple hundred bucks before for just a basic "mild" port job.

Richbrad08

My main question is can i install the cam without upgrading anything in my engine. i know it would be best to port the heads and new springs and such but i dont want to spend that type of money on my car unless a good deal comes up bc i need to replace my interior b/c or the rain from my leak.