I'm in the middle of a split port swap. Head and lower intake are already on the engine. I also ordered injector adapters from 5.0resto. What I need to know is if the pins on the on the coil packs are the same since I have to wire in the 2002 plug on my 95 harness. Has anyone tried to do this?

 

Either that or can I leave the 95 coil pack in its stock location?

 

I left the stock 95 harness and just added some wire then soldered the connections.
Also...i added 99 injectors on to the 95 harness...same thing...just added the 99 connectors and solder.

I also did a how to on the fuel rail to if that helps any.

 

So you used the 95 coil pack and just extended the plug to reach?