LilRoush

Mine is an ABC Exclusive hood.

moontang

ok so im gonna take my eaton to teh machine shop and have the IC lip machined off though i figure i could just take it to work and grind it off and then smooth it with the die grinder but its easier to just have some one else due to time anyway while its there is there anything else i could have them do to it? or something i could do maybe a small bit of porting....and im goin to sheck into so coatings companies around and i jsut may have it powder coated a different color i would like to polish it but i dont think i would want to do that i may also have my valve colors coated to match would that be awkward?

LilRoush

If you are taking it in, take the snout off (draing the oil) and pull the rotors out so they aren't all jacked up when they shave the lip down. With the rotors out, it's super easy to port it while it's in there.

03sixbanger

and dont powdercoat it. just spray it if you want it a different color

ooterman

From what I have heard that is what LilRoush has on, but he made a custom bracket to make it work. The Mach 1 hood have the ram air hood scoop on there that has to be modified. BUT, looks GREAT!!!

03sixbanger

what do you mean by the first sentence?

1slosn95

So i take it you could mount a kenne bell charger to the adapter plate with no problem?? If its been done i want to see it.

03sixbanger

hasnt been done yet....but it can be done...you just better have the motor to hold it

LilRoush

Yeah, KB and whipple upgrades for the 03/04 Cobra all fit. But nobody has gone that far. I can only think of a handful who have enough motor to take more than the M112.

03sixbanger

im gettin there matt gimme time