lowering the seat
#1
lowering the seat
Lets face it, mustangs werent designed for people 6'1" and up. Just getting in and out seems like a contorsionist's act, and when I finnaly do get in there i find my eye looking out of the top of the windsheild, almost to the black stuff on the top. Im looking for a way to lower my seat, using either new seat brackets, of cutting out some cusioning, and i wanted to know if anyone else had already done it. I dont wanna start the project then have to drive to the hardware store on a milk crate.
#3
RE: lowering the seat
Do you have a power seat? I'm 6-1 and I fit fine in mine. I have a power seat and it is adjusted all the way down and probably 1" from being pushed all the way to the rear.
If you have a manual seat, the best bet would be to shorten the brackets. Removing any foam will only make it more uncomfortable.
Good Luck!!!
If you have a manual seat, the best bet would be to shorten the brackets. Removing any foam will only make it more uncomfortable.
Good Luck!!!
#4
RE: lowering the seat
I'm 6'2", have the manual seat, have mine almost to the floor and 1 click from all the way back and can see fine. But then again, all I've ever owned and driven before this car are GM F-Bodies which are shorter than hell (sorry to mention that here, but it's a reference point).