remove stripes

Reply Subscribe

Thread Tools

Search this Thread

Jun 7, 2007 | 10:09 AM

jcoggin

Thread Starter

Joined: May 2007

Posts: 26

remove stripes

whats the best way to remove the side stripes that say mustang?

Jun 7, 2007 | 10:34 AM

05SDI

3rd Gear Member

Joined: May 2006

Posts: 954

From: Palmer, Alaska

RE: remove stripes

Use a heat gun or hair dryer Peel right off in less then 5 min both sides. Ours were on for over a year and NO marks or anything showing where they were!

Jun 7, 2007 | 02:21 PM

jim01028

2nd Gear Member

Joined: Apr 2006

Posts: 193

From:

RE: remove stripes

I was going to peel mine, but after I put the color matched side skirts on it looked much better so it stays for now. That plus the bullet wheels made a huge difference.

Jun 7, 2007 | 08:31 PM

Britinastang

2nd Gear Member

Joined: Apr 2006

Posts: 306

From:

RE: remove stripes

you dont need no heat gun. Just a hot day and a long finger nail does the trick. I pulled my side stripes off, no problems.

Jun 7, 2007 | 11:25 PM

jcoggin

Thread Starter

Joined: May 2007

Posts: 26

RE: remove stripes

thanks what about adhesive remover?

Jun 8, 2007 | 01:01 AM

05SDI

3rd Gear Member

Joined: May 2006

Posts: 954

From: Palmer, Alaska

RE: remove stripes

Britinastang,
I guess it's all relitive! The day I took ours off it was a high of 50 degrees (yes that's 'F') We needed the heat gun! Stripe was 'chipping' and coming off in tiny pieces. I went and grabed the heat gun and wala the whole stripe pulled off with a little heat.

jcoggin,
The adhesive came off with the stripe on our stripes.

Jun 8, 2007 | 04:18 AM

pbg711

1st Gear Member

Joined: Apr 2007

Posts: 57

From:

RE: remove stripes

worst case use gas to take adhesive off just wax when done

Jun 8, 2007 | 04:37 AM

OIIIIO

4th Gear Member

Joined: Jan 2007

Posts: 1,050

From: Maui, Baby!

RE: remove stripes

goo gone works too

Jun 8, 2007 | 10:15 AM

Britinastang

2nd Gear Member

Joined: Apr 2006

Posts: 306

From:

RE: remove stripes

Quote:

ORIGINAL: 05SDI

Britinastang,
I guess it's all relitive! The day I took ours off it was a high of 50 degrees (yes that's 'F') We needed the heat gun! Stripe was 'chipping' and coming off in tiny pieces. I went and grabed the heat gun and wala the whole stripe pulled off with a little heat.

jcoggin,
The adhesive came off with the stripe on our stripes.

fair point...I took mine off on a 80s+ day