Anybody run an MSD ignition box?
01-19-2006, 02:59 PM
#3
1st Gear Member
Thread Starter
Join Date: Dec 2005
Location:
Posts: 149
01-20-2006, 01:33 PM
#4
1st Gear Member
Thread Starter
Join Date: Dec 2005
Location:
Posts: 149
RE: Anybody run an MSD ignition box?
Info from MSD:
You would need to use (2) PN 62152 DIS 4 Plus ignition controls, and (4) PN 89121 tach/fuel adapters. This would give you a total of 8 channels for the 8 coils. The DIS 4 has a step retard feature that will allow you to dial in a few degrees of retard when using nitrous. For more info, check out the links below.
http://www.msdignition.com/ignition_24_6211_6215.htm
http://www.msdignition.com/2005/2005_12.htm
You would need to use (2) PN 62152 DIS 4 Plus ignition controls, and (4) PN 89121 tach/fuel adapters. This would give you a total of 8 channels for the 8 coils. The DIS 4 has a step retard feature that will allow you to dial in a few degrees of retard when using nitrous. For more info, check out the links below.
http://www.msdignition.com/ignition_24_6211_6215.htm
http://www.msdignition.com/2005/2005_12.htm
Thread
Thread Starter
Forum
Replies
Last Post