TR6060 no 1st gear?
05-17-2009, 01:27 PM
#1
4th Gear Member
Thread Starter
Join Date: Jan 2006
Location:
Posts: 1,247
TR6060 no 1st gear?
I just got my TR6060 fixed because I had the dreaded 2nd gear grind. My mechanic replaced the 1-2 syncrho, shift fork and blocker ring. At first the shifting was short, and tight but after the trans warmed up the shifting to all the gears gradually became longer and longer. After about 20min of driving in stop in go traffic, the trans wouldn't go into 1st gear intermittently and I would have to shift into 2nd or 6th and then back into 1st. Plz help
I have put 500 miles on my car with at least 4-5 heat cycles since I got it back on Friday. Today when I first started my car up and shifted, it shifted flawlessly. It wasn't until after atleast 10-15min of driving that the symptoms recurred. At least 1/2 of that was on the highway.
Can anybody tell me if this is a normal break-in or is this an installer mess up?
I have put 500 miles on my car with at least 4-5 heat cycles since I got it back on Friday. Today when I first started my car up and shifted, it shifted flawlessly. It wasn't until after atleast 10-15min of driving that the symptoms recurred. At least 1/2 of that was on the highway.
Can anybody tell me if this is a normal break-in or is this an installer mess up?
05-17-2009, 05:13 PM
#2
4th Gear Member
Join Date: Mar 2005
Location:
Posts: 1,538
I just got my TR6060 fixed because I had the dreaded 2nd gear grind. My mechanic replaced the 1-2 syncrho, shift fork and blocker ring. At first the shifting was short, and tight but after the trans warmed up the shifting to all the gears gradually became longer and longer. After about 20min of driving in stop in go traffic, the trans wouldn't go into 1st gear intermittently and I would have to shift into 2nd or 6th and then back into 1st. Plz help
I have put 500 miles on my car with at least 4-5 heat cycles since I got it back on Friday. Today when I first started my car up and shifted, it shifted flawlessly. It wasn't until after atleast 10-15min of driving that the symptoms recurred. At least 1/2 of that was on the highway.
Can anybody tell me if this is a normal break-in or is this an installer mess up?
I have put 500 miles on my car with at least 4-5 heat cycles since I got it back on Friday. Today when I first started my car up and shifted, it shifted flawlessly. It wasn't until after atleast 10-15min of driving that the symptoms recurred. At least 1/2 of that was on the highway.
Can anybody tell me if this is a normal break-in or is this an installer mess up?
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
