4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Not even mustang related but I need some help!!

Thread Tools
 
Search this Thread
 
Old 07-03-2010, 03:39 PM
  #1  
huey_33
2nd Gear Member
Thread Starter
 
huey_33's Avatar
 
Join Date: Sep 2004
Location: From Ohio, Stationed in NC
Posts: 454
Default Not even mustang related but I need some help!!

Ok, this is probably going to get moved and is way off topic from mustangs. But I didn't want to join another forum to see what could possibly be wrong with my wifes 2005 dodge stratus, plus you guys have been a big help for me in the past. I was driving my wifes car last week and it began stuttering real bad, wouldn't pick up speed and then the service engine soon light came on. Took it to advance auto where the computer read "cylinder 3 misfire". So I bought new spark plugs, put them in and the car is now driving fine. Wife took car back to advance auto today to have them erase the CEL and they're telling her that cylinder 3 is still misfiring. If the car is driving fine now, what could be causing that? Bad coil pack, etc etc etc???? Anyone have any ideas. Thanks for the help.
huey_33 is offline  
Old 07-03-2010, 04:34 PM
  #2  
budders
4th Gear Member
 
budders's Avatar
 
Join Date: Jun 2009
Location: PA, Killadelphia
Posts: 1,373
Default

bad wire on #3 or COP..

u sure its the same spark plug as all the other ones?

try getting a new wire for #3 and see if that works.
budders is offline  
Old 07-03-2010, 05:35 PM
  #3  
huey_33
2nd Gear Member
Thread Starter
 
huey_33's Avatar
 
Join Date: Sep 2004
Location: From Ohio, Stationed in NC
Posts: 454
Default

Everything I have read is pointing towards a bad cop. I replaced all 4 plugs with the ngk iridiums and runs smooth now but is still throwing the code for misfire. Guess I will replace the cop and see what happens.
huey_33 is offline  
Old 07-04-2010, 06:38 PM
  #4  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default

Wait... if u never cleared the code since u put new plugs then its an old code...if its running good clear the code and see if it comes back and go from there
dimebag is offline  
Old 07-04-2010, 07:38 PM
  #5  
huey_33
2nd Gear Member
Thread Starter
 
huey_33's Avatar
 
Join Date: Sep 2004
Location: From Ohio, Stationed in NC
Posts: 454
Default

Originally Posted by dimebag
Wait... if u never cleared the code since u put new plugs then its an old code...if its running good clear the code and see if it comes back and go from there
Yeah I thought the same thing earlier this morning so I went and had them clear the code and it hasnt came back yet.
huey_33 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mstahoo
SVT Forums
10
08-19-2021 09:15 PM
Urambo Tauro
5.0L (1979-1995) Mustang
22
09-07-2015 12:47 PM
mweiland
General Tech
6
08-13-2015 05:11 PM
daytooday
Motor Swap Section
2
08-11-2015 09:22 AM
Jacob4589
5.0L (1979-1995) Mustang
3
08-08-2015 11:00 AM



Quick Reply: Not even mustang related but I need some help!!



All times are GMT -5. The time now is 10:39 PM.