Input bearing retainer Qs
#1
Input bearing retainer Qs
I was looking at my tranny and I noticed some very small play and the retainer says gwarner omotive is this a Ford company or is this newer?
The bearing looked new and spun freely when I removed the retainer, my question is can I add another or put a thicker shim in to take up the slack? The race says Timken then has what looks to be a serial number.
How do I know how much to shim it?
When you remove the retainer and see the gears are they any indicator as to the condition of the tranny?
The bearing looked new and spun freely when I removed the retainer, my question is can I add another or put a thicker shim in to take up the slack? The race says Timken then has what looks to be a serial number.
How do I know how much to shim it?
When you remove the retainer and see the gears are they any indicator as to the condition of the tranny?
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM