vortech ignition control module thing removal.
#1
vortech ignition control module thing removal.
car at one point had a supercharger which is gone now. im going to take off the ignition/boost control module thing.
it appears to me that the stock wiring comes out of the harness and has a connector at 'A' in the photo. that connector at 'A' is supposed to connect to the connector at location 'B'. I believe the wiring and connectors in area 'C' came with the vortech assembly. the wires leave the right side of the pic and go straight to the vortech module.
so stock setup is remove C, and put A into B, right?
also, is there any reason to leave the vortech ignition/boost control module installed?
thanks
it appears to me that the stock wiring comes out of the harness and has a connector at 'A' in the photo. that connector at 'A' is supposed to connect to the connector at location 'B'. I believe the wiring and connectors in area 'C' came with the vortech assembly. the wires leave the right side of the pic and go straight to the vortech module.
so stock setup is remove C, and put A into B, right?
also, is there any reason to leave the vortech ignition/boost control module installed?
thanks
Last edited by 9550; 03-06-2012 at 05:16 PM.
#2
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM