Smog Pump Removal Question
#1
Smog Pump Removal Question
My smog pump is on it last leg so i'm going to replace it with the smog pump delete kit .My question is what to do about back of heads ?I've still got the tube but how do I block the holes off ?Thanks for looking and responding.
#3
Run a shorter belt
remove tubes from the back of the heads and either pinch and roll them shut, weld them shut, or get the 5/8 plugs
remove the vacuum lines and solenoids from the passenger strut tower
Cap off the vacuum source at the intake
unplug the EGR valve
shove the 2 vacuum lines that go into the fender into them (no need to plug, one goes in and the other is an out so there is no vacuum once you disconnect the one line from the intake)
pinch or weld shut the tube on the midpipe that goes up to the air pump
remove tubes from the back of the heads and either pinch and roll them shut, weld them shut, or get the 5/8 plugs
remove the vacuum lines and solenoids from the passenger strut tower
Cap off the vacuum source at the intake
unplug the EGR valve
shove the 2 vacuum lines that go into the fender into them (no need to plug, one goes in and the other is an out so there is no vacuum once you disconnect the one line from the intake)
pinch or weld shut the tube on the midpipe that goes up to the air pump
#4
as far as the lines that go to heads, just cut the hose under the air intake tube and stick a socket in the end and clamp it! works!! same thing for the hpipe! You will use the remaining tube to plug the hpipe and clamp it!!! that way you can convert back to smog without buying a new hpipe!
Last edited by Js88lx; 11-25-2011 at 07:35 PM. Reason: added more
#5
as far as the lines that go to heads, just cut the hose under the air intake tube and stick a socket in the end and clamp it! works!! same thing for the hpipe! You will use the remaining tube to plug the hpipe and clamp it!!! that way you can convert back to smog without buying a new hpipe!
Who needs smog? open headers FTW!!!!
#6
HAHA.., not too ugly, but id rather keep it a little ugly for it being so simple! just add some nice honda stickers not only will it look killer it will add some ponies
Last edited by Js88lx; 11-25-2011 at 09:02 PM. Reason: added
#7
http://www.trickflow.com/egnsearch.a...0&autoview=sku
they are 5/8-11 thread. It will most likely be plugged up with carbon so you will have to clean the hell out of it and possible run a thread chaser in to clean it out.
they are 5/8-11 thread. It will most likely be plugged up with carbon so you will have to clean the hell out of it and possible run a thread chaser in to clean it out.
Thread
Thread Starter
Forum
Replies
Last Post