1967 mustang update pictures
#12
Its probably way out of my price range if he does that for a living Ive been debating on whether to sandblast myself or take it somewhere. I sandblasted my first car with a small sandblaster and it took forever. If I could get a little bit better one for not too much I would probably just do it myself again.
#13
having a good blaster makes a difference
I know that using a small cheap blaster it takes forever. If you go to your local tool rental store they will rent one out. They are a little spendy but that comes with the biggest compressor and the biggest sandblaster. If you could do it in a day and you don't have a huge sandblaster than that might be the way to go. Good luck
matts 67 coupe
matts 67 coupe
#16
rear quarter panel dent
The holes on the rear quarter panel are from the last owner pulling a dent out. They drilled holes to put a dent puller in to pop it out. I will have to finish pulling them and then weld and fill the dent.
Thread
Thread Starter
Forum
Replies
Last Post
Joolander
2005-2014 Mustangs
5
05-02-2016 02:28 AM
mustangv6305
2010-current S197 Appearance Section
6
08-29-2015 01:37 PM