MustangForums.com

MustangForums.com (http://mustangforums.com/forum/index.php)
-   The Racers Bench (http://mustangforums.com/forum/the-racers-bench-127/)
-   -   HP guesses (http://mustangforums.com/forum/the-racers-bench/712607-hp-guesses.html)

SubTexel 08-07-2014 02:01 PM

HP guesses
 
Well, pretty soon I'll be getting the SRT8 back up and running... Been off these forums for a while but soon I'll be throwing videos up of races once all is said and done. Plus these forums seem a bit quiet so might as well start a thread.

My car:
Forged 6.1 (heads, cam, etc...), YSi (first round of dynos will be ~13-14 psi... Next range in early spring will be with the YSi maxed out, on my setup anyhow).

No N20, will be doing two dyno sessions (one on 91 pump, and the other on C16). I already have a pretty good idea what it'll be putting down but thought it'd be fun to see who can get the closest guess. :)

And a random pic of the little Si blower that came in the kit and the YSi sitting next to it.

https://lh3.googleusercontent.com/-U.../IMG_1279.jpeg

And the motor as it sits all sad and ready to go into the car already.

https://lh5.googleusercontent.com/-V...95163657-2.jpg

https://lh4.googleusercontent.com/-u...95160340-2.jpg

bluebeastsrt 08-07-2014 05:54 PM

Right around 700 at the wheels.

SubTexel 08-07-2014 06:20 PM

Quote:

Originally Posted by bluebeastsrt (Post 8416023)
Right around 700 at the wheels.

haha if it dynos that with C16 @ 14lbs I'll set the car on fire :p

On 91 I'm not entirely sure.

bluebeastsrt 08-07-2014 07:13 PM

Quote:

Originally Posted by SubTexel (Post 8416031)
haha if it dynos that with C16 @ 14lbs I'll set the car on fire :p

On 91 I'm not entirely sure.

lOL that was the low guess for pump gas.

SubTexel 08-08-2014 12:14 AM

Quote:

Originally Posted by bluebeastsrt (Post 8416045)
lOL that was the low guess for pump gas.

I'd be happy with that on pump gas. Hows your build coming along?

bluebeastsrt 08-08-2014 12:30 AM

Completely stalled right now. It's sitting up on blocks with no tires or engine. Fordstrokers says my motor will most likely be completed mid October.

SubTexel 08-08-2014 12:57 AM

I made the mistake of changing direction one too many times on my build, so I've been the reason for my delays. I'd be going crazy if I had to wait that long for my motor to be done, looking forward to your build getting done and seeing the times it runs.

ctgreddy 08-08-2014 08:16 AM

Quote:

Originally Posted by bluebeastsrt (Post 8416138)
Completely stalled right now. It's sitting up on blocks with no tires or engine. Fordstrokers says my motor will most likely be completed mid October.

You'll get it by next spring then. ;). lol

OP I'm gonna guess 690whp on 91 tune, and 850whp on race gas. should be a hell of a modern hemi car! on 91 wont be much more than the hellcat tho lol. Damn you new cars!

SubTexel 08-08-2014 12:52 PM

I'm gonna shoot for low 700s on 91, just to beat out an F1A powered Charger that has a semi-similar build to mine lol. I have much better heads, the bigger blower and a bigger cam haha. But really I'll be happy with a nice safe tune on 91, the race gas is where I want to make good numbers honestly.

Bought a couple pulleys last night, I just might make some runs with the YSi maxed out on race gas and get it tuned so I can do swaps at the track on kill mode before the season ends.


All times are GMT -5. The time now is 07:25 PM.