The following suspension, brake stuff and wheels installed yesterday....
#1
The following suspension, brake stuff and wheels installed yesterday....
Will give feedback after I drive the car for more than 30 minutes [&:]
Spohn Adj. LCA's, Panhard Rod, BMR PH Rod Brace (everything well greased and tightly installed - new Ford bolts and fasteners used for LCAs).
Steeda SS Brake Lines, Hawk Performance Ceramic Pads, PowerSlot Rotors, Ford High Performance brake fluid DOT 3 (might be stock fluid - not sure)
18" KMC Hot Wheels 68's with 255/45/18 Nitto 555s
------------------------------------------------------------
Spohn Rear Sway bar did not go on yet because they forgot to include some installation parts in the shipment(those b*stards).
Spohn Adj. LCA's, Panhard Rod, BMR PH Rod Brace (everything well greased and tightly installed - new Ford bolts and fasteners used for LCAs).
Steeda SS Brake Lines, Hawk Performance Ceramic Pads, PowerSlot Rotors, Ford High Performance brake fluid DOT 3 (might be stock fluid - not sure)
18" KMC Hot Wheels 68's with 255/45/18 Nitto 555s
------------------------------------------------------------
Spohn Rear Sway bar did not go on yet because they forgot to include some installation parts in the shipment(those b*stards).
Thread
Thread Starter
Forum
Replies
Last Post
Fast-Hands
5.0L (1979-1995) Mustang
2
08-19-2015 06:54 AM