got steeda plates, have some questions before install
#1
got steeda plates, have some questions before install
I finally bought steeda camber plates to fix my busted oem strut mounts. They are used with about 30k miles on them.
1. Should I re-grease the bearings, if so can i get grease at a local autoparts store, if so which grease?
2. Is there a good write up which I seem to can't find, besides the one on the Steeda website?
3. How many more miles can I get out of these plates with normal daily driving?
4. Any special tips that an alignment shop should know about to adjust these?
Thanks
1. Should I re-grease the bearings, if so can i get grease at a local autoparts store, if so which grease?
2. Is there a good write up which I seem to can't find, besides the one on the Steeda website?
3. How many more miles can I get out of these plates with normal daily driving?
4. Any special tips that an alignment shop should know about to adjust these?
Thanks
Last edited by defiance; 09-05-2012 at 06:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post