Help a brother out
#4
You might try reaching up from under the bumper. Otherwise, turn your wheels to the left and you'll see two clips along the center front and one on the lower inside. I think there's a couple screws to remove, then start with the two centered clips, then see if you can access the light, if not remove the lower inside, that should give you the access you need.
Edit: to clarify this is for loosening the liner enough to access the light without removing.
Edit: to clarify this is for loosening the liner enough to access the light without removing.
#6
From the '07 Owner's Guide:
1. Make sure the headlamp control is in the OFF position and open the hood.
2. Locate the lamp assembly from underneath the vehicle and rotate the bulb socket counterclockwise and remove from lamp assembly.
3. Pull the bulb straight out from the socket.
Install the new bulb in reverse order.
1. Make sure the headlamp control is in the OFF position and open the hood.
2. Locate the lamp assembly from underneath the vehicle and rotate the bulb socket counterclockwise and remove from lamp assembly.
3. Pull the bulb straight out from the socket.
Install the new bulb in reverse order.
Thread
Thread Starter
Forum
Replies
Last Post