Need advice on Hole Filler (Bumper)
#1
Need advice on Hole Filler (Bumper)
Hey all, Purchased my Baby brand new last year In the lovely state of Hawaii...Sadly they pre-drill bumper holes for a front license plate. I am leaving island in a few weeks and returning mainland and Am going to cover the Holes with Leman Stripes, however I want to fill the holes with something so that the Stripes don't divot in at that point on the body, anyone have any ideas?
#2
The Hillman Group 1/2-in x 1/8-in Black Plastic End Cap
http://www.lowes.com/pd_441500-37672...3D1&facetInfo=
Here is a smaller qty...I just bought some here for my truck, I can send you some if you like....PM me your address:
http://www.ebay.com/itm/161101295982
http://www.lowes.com/pd_441500-37672...3D1&facetInfo=
Here is a smaller qty...I just bought some here for my truck, I can send you some if you like....PM me your address:
http://www.ebay.com/itm/161101295982
Last edited by Roy_R; 05-09-2014 at 11:38 AM.
#3
Use something like jb weld or fiberglass resin that can be sanded down smooth with the surrounding area. Since you doing stripes it won't matter if it doesn't look pretty underneath as long as its smooth
#4
Was thinking of that, Just want to try and find something that won't expand or contract with temperature change. Don't want the stripes to start looking like they have bubbles under them in that location if the weather changes or I have to move duty stations to a different Climate.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM