changing the stock shifter?
#1
changing the stock shifter?
does anyone have any videos of how to change the stock shifter on a manual 11' V6? And does anyone know if it is possible to order from ford the aluminum ball shifter that comes on the premium GT?
#2
Search our forum first.
There's options on these treads also:
http://www.allfordmustangs.com/forum...ter-*****.html
http://forums.themustangsource.com/f...011-gt-486244/
Personnaly I have heard of more than one person state that the Aluminum **** soaks up alot of heat depending on the time of year....
I have ordered the Epco **** with a grabber pony polished adapter.
Cheers,
Chris
There's options on these treads also:
http://www.allfordmustangs.com/forum...ter-*****.html
http://forums.themustangsource.com/f...011-gt-486244/
Personnaly I have heard of more than one person state that the Aluminum **** soaks up alot of heat depending on the time of year....
I have ordered the Epco **** with a grabber pony polished adapter.
Cheers,
Chris
#3
From a personal experience, looking for a short throw shifter, if that is what you are looking for or just the ****. no one makes a short throw or taller shifter for '11 v6, even roush has not finished the taller one for 5.0 and haven't thought about the v6. this is **** i have but i want the taller shifter as I had in my '10 gt, and according to roush they said what they are working on isn't much different than stock except it could be taller, which i want.
#4
No, I was just looking at changing the ****, I should have been more specific. 6+6, your v6 set up is exactly what I had in mind. I like the shorter shifters personally. Does the **** just screw off, or do I need to do some disassembling?
#5
#6
nope just grab it and turn counter clockwise, no boot change needed, but the little spacer thing so don't see threads i got w/ the roush shifter, which when you use the taller shifter it's left over so good thing i hung on to.
#7
i just finished installing my new roush shift boot and ****....easy as pie..open rear console then unsnap center console from the sides...9 pushpins hold shifter boot in place...remove and reinstall new shift boot...screw in new **** then tighten lock nut and bam...awesome white roush shift *** and new shift boot...looks awesome...im going the roush stage 1 all the.way...soo far have the roush console emblem...roush side badges..and the new rolsh 2011 rear badge...When more funds are available the roush front grille.rear valance and side splitters......il take pics....
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by badger2840; 09-23-2010 at 07:04 PM.
#8
i just finished installing my new roush shift boot and ****....easy as pie..open rear console then unsnap center console from the sides...9 pushpins hold shifter boot in place...remove and reinstall new shift boot...screw in new **** then tighten lock nut and bam...awesome white roush shift *** and new shift boot...looks awesome...im going the roush stage 1 all the.way...soo far have the roush console emblem...roush side badges..and the new rolsh 2011 rear badge...When more funds are available the roush front grille.rear valance and side splitters......il take pics....
Uploaded with ImageShack.us
Uploaded with ImageShack.us
I didn't see it anywhere on their site, do you have a part number?
Did they offer the **** in any other color then white?
I was hoping for either a black ****,
Or the one that looks this: (which I like best) http://image.popularhotrodding.com/f...gt+shifter.jpg Who makes that one and where can it be purchased from? Anyone?
Last edited by GTS 3.7L; 09-26-2010 at 09:56 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Joolander
2005-2014 Mustangs
5
05-02-2016 02:28 AM
yourmom6990
3.7L V6 Technical Discussions
2
10-14-2015 10:08 PM