price for a 351c block
#2
RE: price for a 351c block
#5
I have a 351C block for sale
I have a 1972 351C block for sale
it is bored .030 and checks out within spec for bore & taper, so no need for machining.
This engine ran perfect when I removed it from my 70 mach1 and had 5,000 miles on it since it was last rebuilt, I changed it out for a 4 bolt main engine block.
Asking $ 250.00 (US) you pick up
Also have crank, damper, rods etc if you need them.
I also have 3 sets of 351C heads. 2 of them are 2V Open Chamber & 1 set is 4V Open w/ Stainless valves (1 valve is bent and needs replacing) with hardened valve seats.
e-mail me at smason@ptibox.com
Located near Hamilton Ontario - 1 hour drive from Buffalo, NY
Cell # 416-949-7103
Regards
1970muggzi
it is bored .030 and checks out within spec for bore & taper, so no need for machining.
This engine ran perfect when I removed it from my 70 mach1 and had 5,000 miles on it since it was last rebuilt, I changed it out for a 4 bolt main engine block.
Asking $ 250.00 (US) you pick up
Also have crank, damper, rods etc if you need them.
I also have 3 sets of 351C heads. 2 of them are 2V Open Chamber & 1 set is 4V Open w/ Stainless valves (1 valve is bent and needs replacing) with hardened valve seats.
e-mail me at smason@ptibox.com
Located near Hamilton Ontario - 1 hour drive from Buffalo, NY
Cell # 416-949-7103
Regards
1970muggzi
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM