What oil/filter do you use?
#1
What oil/filter do you use?
I know there is a designated Oil forum but I want 4.0 specific answers...
I use Motorcraft Synthetic Blend 10w-30.
And the Motorcraft Filter.
I noticed alot of people use 5w, I know its a different weight then 10w obviously but whats the difference or benefits of one another?
I use Motorcraft Synthetic Blend 10w-30.
And the Motorcraft Filter.
I noticed alot of people use 5w, I know its a different weight then 10w obviously but whats the difference or benefits of one another?
#5
when its below 32 degrees...
above 32 degrees, it dont a matter.
30 weight is 30 weight.
If its cold where you a be.
The W means winter temp viscosity.
In the summer it a dont a matter.
In da winter, the 5W helps with oil flow at lower ambient temps.
10W during the winter, NO.
The 30 is the normal operating temp viscosity.
Pure oil now, Purolator.
Another question down, next.
above 32 degrees, it dont a matter.
30 weight is 30 weight.
If its cold where you a be.
The W means winter temp viscosity.
In the summer it a dont a matter.
In da winter, the 5W helps with oil flow at lower ambient temps.
10W during the winter, NO.
The 30 is the normal operating temp viscosity.
Pure oil now, Purolator.
Another question down, next.
Last edited by 157dB; 05-29-2010 at 11:43 AM.
#6
If its cold where you a be.
The W means winter temp viscosity.
In the summer it a dont a matter.
In da winter, the 5W helps with oil flow at lower ambient temps.
10W during the winter, NO.
The 30 is the normal operating temp viscosity.
Pure oil now, Purolator.
Another question down, next.
The W means winter temp viscosity.
In the summer it a dont a matter.
In da winter, the 5W helps with oil flow at lower ambient temps.
10W during the winter, NO.
The 30 is the normal operating temp viscosity.
Pure oil now, Purolator.
Another question down, next.
#8
#10