tjd8456

The haynes repair book I have does'nt show the right way the serpentine belt goes. It only shows 1 idler pully mine has 2. It is a 01 4.6 soc. Anyone have a correct schematic?

04BlueGT

The haynes manual is close. From the tensioner moving right, go over top the waterpump pulley, then down to the crank, right to pass under the power steering and up to the alternator. The rest if fine. Unless, of course, my belt is just on wrong?


[IMG]local://upfiles/19116/3D448257A6414AAE8E076A432845FBD5.jpg[/IMG]

[IMG]local://upfiles/19116/FF31AF7A861345AD91BCB03B591D7D20.jpg[/IMG]

[IMG]local://upfiles/19116/19A48480575244589310F2FB96C4C78A.jpg[/IMG]

tjd8456

Thank you very much. I'm going out to the garage and try it. Then hook up exhaust. That i'm not looking forward to. Thanks.

04BlueGT

No problem. That's why we are here - to help each other, bragg, and lie a little. Good luck on the exhaust.