intake manifold dyno sheets (typhoon again)
10-12-2006, 12:55 AM
#1
4th Gear Member
Thread Starter
Join Date: Feb 2004
Location:
Posts: 1,895
intake manifold dyno sheets (typhoon again)
Ive been searching and have come up empty. Im looking for dyno sheets for the typhoon intake manifold. Im not looking for its peak power, as it is out of our stock rpm range. Im interested in what it does to the power/tq curves from 1k to 5k rpm. Anyone know? Are there any actual dyno sheets availible?
10-12-2006, 11:26 AM
#5
3rd Gear Member
Join Date: Jul 2004
Location:
Posts: 770
RE: intake manifold dyno sheets (typhoon again)
ORIGINAL: JPGT_00
thats becasue no one has that POS.
thats becasue no one has that POS.
10-12-2006, 11:34 AM
#6
6th Gear Member
Join Date: Dec 2005
Location: Florida
Posts: 5,893
RE: intake manifold dyno sheets (typhoon again)
Do not even waste your time with it - there have been tons of people that have lost power with it, or have gained 3rwhp or so... Dont buy into the articles. It's a piece of junk.
10-12-2006, 11:56 AM
#7
5th Gear Member
Join Date: Feb 2004
Location:
Posts: 2,028
RE: intake manifold dyno sheets (typhoon again)
The dyno sheets for everything seem to start the pulls at above 2,000 rpm.Unless the car is a track only vehicle the pull from 1,000 rpm would be more usefull.Idle would be even better.
The jury's still out on this one,but there is an intake I like especially the cooling mod.The runner design at the plenum end could be modified by welding and grinding to give a smooth radius entering the runner.
http://www.hiperformancesolutions.com/index.html
It's the same runner design as the stock and the Typhoon piece but it is American made.
The jury's still out on this one,but there is an intake I like especially the cooling mod.The runner design at the plenum end could be modified by welding and grinding to give a smooth radius entering the runner.
http://www.hiperformancesolutions.com/index.html
It's the same runner design as the stock and the Typhoon piece but it is American made.
10-12-2006, 12:17 PM
#8
3rd Gear Member
Join Date: Jul 2004
Location:
Posts: 770
RE: intake manifold dyno sheets (typhoon again)
ORIGINAL: xxkazp3rxx
Do not even waste your time with it - there have been tons of people that have lost power with it, or have gained 3rwhp or so... Dont buy into the articles. It's a piece of junk.
Do not even waste your time with it - there have been tons of people that have lost power with it, or have gained 3rwhp or so... Dont buy into the articles. It's a piece of junk.
btw only worrying about peak hp will make for a dyno queen. If all your worried about is peak then LTs woud be a waste too hahahaha
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
