Will this fit/work
#1
Will this fit/work
my buddy has an 04 cobra and he replaced his stock S/C (Eaton?) with a whipple and i asked him if i could buy that and put it on my 2000 gt 4.6 i asked if it would fit/function correctly, he said maybe with a new intake manifold, ejectors,programmer,throttle and plenum and new intake. do u guys think this is worth it and will my car blow up lol. also what would it cost for the support stuff. not sure what he will charge me
thanks for help
matt
thanks for help
matt
#2
RE: Will this fit/work
Not worth the hassle. Gonna require new heads too. Just get a procharger or similiar setup.
Might want to look into INjectors too. Ejectors might launch engine parts at people.
Might want to look into INjectors too. Ejectors might launch engine parts at people.
#3
RE: Will this fit/work
ORIGINAL: wisk
Not worth the hassle. Gonna require new heads too. Just get a procharger or similiar setup.
Might want to look into INjectors too. Ejectors might launch engine parts at people.
Not worth the hassle. Gonna require new heads too. Just get a procharger or similiar setup.
Might want to look into INjectors too. Ejectors might launch engine parts at people.
#4
RE: Will this fit/work
Its pausable, just not pratical. Need some custom fabricating.
If someone had the time to mass produce a bolt on kit to put a Eaton on a sohc GT, then so many eatons wouldnt go to waste, and maybe people with a smaller budget could take advantage of a used SC and some cheaper power.
If someone had the time to mass produce a bolt on kit to put a Eaton on a sohc GT, then so many eatons wouldnt go to waste, and maybe people with a smaller budget could take advantage of a used SC and some cheaper power.
#7
RE: Will this fit/work
ORIGINAL: KartR31487
Its pausable, just not pratical. Need some custom fabricating.
If someone had the time to mass produce a bolt on kit to put a Eaton on a sohc GT, then so many eatons wouldnt go to waste, and maybe people with a smaller budget could take advantage of a used SC and some cheaper power.
Its pausable, just not pratical. Need some custom fabricating.
If someone had the time to mass produce a bolt on kit to put a Eaton on a sohc GT, then so many eatons wouldnt go to waste, and maybe people with a smaller budget could take advantage of a used SC and some cheaper power.
Thread
Thread Starter
Forum
Replies
Last Post
Craigotron
2005-2014 Mustangs
2
06-18-2012 10:41 AM
Craigotron
GT S197 General Discussion
11
06-16-2012 10:29 AM