dafizuck

I am getting ready to install my cobra control arms. I do not want to reuse the stock bolts and was looking at two sets. I see they fit my car, but was looking at some opinions of these, or if they are what I am looking for.
http://store.summitracing.com/partde...p;autoview=sku

http://store.summitracing.com/partde...p;autoview=sku

Thanks in advance.

pete1665

i dont really see a reason to replace them, but if you really want to i'd just go to your local dealer. The ones listed aren't really an 'upgrade'.

jrherald420

theres no reason to buy new ones unless you just have money to waste!!!!

dafizuck

Oh... I was under the impression that I needed to change them. Saved me $20, thanks guys.[sm=smiley20.gif]

jrherald420

no problem i reused mine and they work just fine.

LynnBob Mustang

I know the Haynes manual says to replace them but most shops I asked about it said not to unless they are rusted or in bad shape.

Lynn

dafizuck

I didnt want to start another thread but have another question. Can anyone give me the torque specs on the two bolts in the rear of the a arm. Thanks again for all the help.

jrherald420

just hit them with an impact they'll be fine.