When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Tim do you have MM CC plates? If so what arrangement did you put the spacers in? I had 1 short underneath and 1 short and 2 long on the top but its hitting the hood. I think my hood is misaligned though. Its not even with the fenders
thats not very strong. i used to have one rated at around that and it was a disappointment on the real tough bolts. i have a 750 lb/ft. now and its almost perfect. still has a bit of trouble on super tough bolts though.
It's very good for a $40 electric powered unit...
I have a air-powered 3/4" drive 1250 ft/lb (1700 ft/lb max) Ingersoll-Rand that can break you arm--however it cost $550 and requires 10 cfm at 120 psi.