Bacofield

I found someone on Craigslist who wants to sell there Cragar SS wheels and Tires. He said that they went on his 68 Camaro. I did some of my research and it looks like these wheels are made for older muscle cars.
I only want to buy the TWO rear tires to Drag. Nothing else but for that purpose... Can someone Please tell me if these will fit or if they have enough clearance for the fender. I don't care if they stick out a little... the bigger the rear tire.. the better for dragging

jmac72187

You will need more info than the wheel model. Size? Backspacing?

Bacofield

oh ok, the add says nothing about the wheel model or backspacing, all it shows are the tires with are BF GOODRICH TA and the wheels.

Jazzer The Cat

***HERE*** is a nice little site that has some fitment and misc. issues for older cars.

The bolt pattern appears to be 5x4.5" and the same as your ride, so back-spacing seems to be the only issue. Generally speaking, most older rides had very little off-set so would need more info as the jmac said.

Jazzer

jmac72187

haha

I am "The Jmac."

Jazzer The Cat

my bad

The Jazzer

grogan

they fit on my car but the ones i have are 15x 14 and they stick 4 inches passed the fenderwells...cragar ss's are heavy too. not that good for drag racing.. atleast the 14 inch wide ones are heavy..

grogan

i wanna be "the grogan"

Jazzer The Cat

Let the resolution be passed.....

From this day forward the following persons will be referred to in the following:

jmac72187 = The Jmac
grogan = The Grogan

The MF House Speaker Jazzer

Sxynerd

Can I be, "The Nice A**hole"?
Or should I just be "Nerd"?