T45 wont shift into 1st after rebuild!
#1
T45 wont shift into 1st after rebuild!
I just finished getting my parts and transmission together. Its currently sitting on the floor completely finished except no fluid. I did a dry run shifting through gears and it wont go into 1st at all. 2-R work and feel fine..
All I had to replace was 5th and reverse syncros
Can anyone shed some light on what I did wrong?
All I had to replace was 5th and reverse syncros
Can anyone shed some light on what I did wrong?
#2
I did something stupid when I put my tranny back together, maybe it will help.
when i was putting the shifter back on, the plastic cup that the end of the shifter sits in, popped off and physically prevented me from being able to get first gear. Removed shifter, put bushing back in place, and had first again!
Hope its something as simple.
when i was putting the shifter back on, the plastic cup that the end of the shifter sits in, popped off and physically prevented me from being able to get first gear. Removed shifter, put bushing back in place, and had first again!
Hope its something as simple.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM